Add A PoE Switch to IP Camera NVR System

Thanks for you. It was very helpful.

thankyou

very interesting

Thanks for the video. I have a scenario here; connected 9 cameras on 3 separate POE switches which are basically connected to the OFFICE LAN. On top of that I have POE NVR on another Building connected with 8 ip cameras on its ports. I can view these 8 cameras connected directly on the NVR but fail to view those on the LAN though the NVR is connected to the LAN. What settings should I change to enable me to view both cameras; on the LAN and those connected on the NVR ports directly.

Pro

Is there a method to add channels to a NVR to increase the number of cameras visible?

After adding a new switch network are unreachable and even the light in a poe doesnt blink Im using cisco 350 managed switch. Can you help?

This is very helpful and I just have one question. In my home, I saw 6 IPCs cables connected with POE switch, which then 6 cables connected between the POE switch and the NVR. Would only be one cable connecting NVR and the POE switch?

What if you still have no internet connection, but you want to test if the camera is working. Is the camera still works if you just connect it to the nvr through the monitor connected by hdmi?

I have a 32 reolink camera system how many poe switch will i be able to use to set up my system?

I have two buildings: my house and garage, not too far apart. Currently, I have a single Ethernet cable running from my house to the garage. Now, I want to install eight IP cameras in my garage, but I don't want to run separate Ethernet cables from my house to each individual camera in the garage.

My plan is to use a POE switch in the garage. This PoE switch would power and connect all eight cameras. Then, I'll connect this garage PoE switch to another switch I have in my house. This house switch is connected to my XVR.

So, essentially, I'd have all eight garage cameras connected to a PoE switch in the garage, and that switch will connect to another switch in my house, which in turn connects to my XVR. Do you see any issues with this plan? Thanks you.

Is it possible to connect 7 cameras to a 8 channel poe switch And pass that to a 4 channel NVR?

I have 4ch NVR, can adding PoE switch add more camera on the NVR? eg.. 5 or more camera on the 4ch NVR ?

Can you add more cameras (like 24 cameras) in this design?

Here is my scenario. I have two buildings that are separated by 30 feet of distance. One building has four cameras and a ethernet cable running underground to Building B which is the main building. The main building has four cameras. We now want to switch to a poe system. We are thinking we get an 8 PORT p o e switch for Building B and an 8-port poe switch for main building + NVR IN MAIN BLDG.. ethernet cable running from Building B to building A would connect the two POE switches. Is there anything we are missing or will this setup work. thank you for your time

❤

Thanks for this video , Is the wireless router necessary for the poe switch with multiple camera connected to function properly?

Important infos.
Thank you