Комментарии:
by default the start is not were you show at the start of the tutorial
ОтветитьIs there a new version of this for 0.21? I get to the 2nd part and I can not get the circle located in the correct position to make the hole.
ОтветитьWhat did I do wrong? There’s no way to to start a new body. It’s just blank
ОтветитьVielen Dank, dieses Video war mein Start in den 3d druck!
Thanks a lot, this video was my start into 3d printing!
very nice
ОтветитьAwesome stuff bud.
ОтветитьSeeing a lot of negative comments from people who are not utilizing pause and/or simply replaying a part.
ОтветитьHonestly not a tutorial. You're constantly speeding around and have so many extra features that aren't even in the app you're having us use
ОтветитьThank you exactly what i needed!
ОтветитьHave to look for basic tutorials, when i don't do exactly like you strange things happen that cost me hours to google whats happening. For example if i draw this shape at another position than you i can't set dimension because there are "constraints" - now to find out what that means and why takes hours not 5 minutes.
Ответитьmerci
ОтветитьNever can get DoF to go to zero...no matter what. Frustrating.
ОтветитьThank you.
Ответитьty!
ОтветитьThere was 30 people new to CAD and 3D printing in the class and no one got a 3D part in 5 minutes.
ОтветитьI hated this video...
Ответитьmy hole doesnty mirror when I click mirror sadly :/
ОтветитьYa need to specify the FreeCAD set up as my virgin FreeCAD window looks nothing like yours. In particular, the Model/Task window on the left.
ОтветитьThis is a true "learn how to in five minutes!"🥰
ОтветитьBro u made the best cad tutorial without even trying, all other tutorial r so trash
ОтветитьToo fast without enough explanation of each step..
ОтветитьI have to say, as someone who has manually drafted for years and works daily with computers, this has to be one of the worst tutorial videos I have ever seen. It's obvious the presenter is very familiar with the program since he's flying through the creation of the model, but he isn't explaining anything about how or why he's doing anything, and the set-up of his program is very different from the current download. A better title may be "An experienced user drafts a part in 5 minutes with FreeCAD". Over an hour on this video and I'm only half way through because I've had to repetitively replayed parts multiple times to try and figure out what he's doing, then find it on the current version of FreeCAD.
ОтветитьI've been trying to use this program since 360 craped the bed with its license, anytime I try to do anything with it I end up just giving up on it. But this makes it seem a lot more manageable
ОтветитьStart to finish in 5 minutes, yeah right, for an expert maybe , way too fast for a beginner especially if the learner hits the wrong button/command, even trying to correct the error is difficult. Didn't help me at all I'm sorry.
ОтветитьYep - nobody likes to waste time on video that's incorrect - - so stop being a hypocrite and update how steps actually occur
ОтветитьThat was awesome, thanks!
ОтветитьThank you very much!!!
ОтветитьWhen create a new project and go to tasks, there is nothing
Ответитьhow to do acrylic bending?
Ответить@FreeCAD Academy I have an issue I can't resolve. When I export my STL and open it In my slicing software my model is alot bigger than what I created. Have you seen this issue. My freecad drawing is set to mm.
Ответитьis there a way to snap the polylines to the origin? when I got to the step where you added the circle, my model was off by quite a small amount and I couldn't constrain it to the origin.
Ответитьunbeilable my mind is blown
Ответитьcan you import a vector file, and extrude
it
i. the software? if so, what format?
This is an EXCELLENT walkthrough! It has all the necessary information to see what FreeCAD can do and how to do it without getting bogged down in all the details! Thank you!
ОтветитьI would like to do the sketch directly to the 3d model , like drawing the circle .
I do not like go back to 2d sketch to drawing a circle.
Any help !
i feel like an abacus trying to program python lol
Ответить885. That was fast.
ОтветитьThanks. The first lesson I learned and helped me know how to use freecad
Ответитьmuch too fast
ОтветитьWhich part is this ????
ОтветитьOK it's been 4hrs and I haven't got a 3d rendering. It's easy if you know
ОтветитьIt sucks too hard: I DO EVERYTHING E f*** XACTLY !!! like in this tutorial, but there is 1 degree of freedom always left and i fuckin can't tell why!!! What the fuck!!!!!!!!!!!!!!!!!
ОтветитьCan you make video on how to do 2d ploting with pen on 3D printer using Path workbench ?
Ответитьvery cool
ОтветитьThis is severely outdated
ОтветитьThank You!
ОтветитьThank you 🙏
Ответить