Комментарии:
Testing a cpu in a gpu bound scenario is pointless...
ОтветитьI just got that case in black. I used the Asrock B550M-ITX/ac with a Ryzen 7 5700G with stock cooler, a 500gb Kingston SA2000 nvme and 64gb of corsair DDR4 Ram. The Power Supply is a Be Quiet SFX Power 3 450W. I'm still waiting for an adapter to connect the USB C to the USB 2 header on the mainboard. Not the best option but at least it will work that way. And a Intel Arc 750 is also on the way.
ОтветитьGot a knock off of this case for 80. The cpu cooler doesn't fit, the gpu extension is crushed by the mother board and the inside power cable is backwards getting crushed too. It works but for how long.
ОтветитьWhat mobo would you recommend if you wanted to use the USB C on the case?
Ответитьcan i stand it up?
ОтветитьPSA for anyone wanting to replicate this build:
I built pretty much this exact build and one suggestion I have is to PLEASE replace the WiFi/Bluetooth card that comes with the motherboard. It's really, really slow. I made the mistake of not replacing it until after I built the PC, so I had to basically completely disassemble the PC to upgrade that and rebuild.
hw heavy is it in total? approximately
ОтветитьI love so much Mini ITX
Ответитьcopied it and it did not turn on😢
ОтветитьWould the stock cooler than comes with the 5600x work or no?
ОтветитьToo big for a lunch box
ОтветитьLink to the carrying case?
ОтветитьSeriously you tell this build to be 880 but when i looked up at my area (Not from US though) the total would cost me around 1300USD
ОтветитьFront type c wont work or it was already mentioned
ОтветитьWhat is the best gpu you could upgrade to ? For this build without compromising low temps
ОтветитьSub if your Intel
👇
like if your amd
👇
soo cool! mostly likey going to follow your build as i have a job that requires me to move location every few months,
Ответить❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
ОтветитьSo an extra hdd and in this case ssd would attach only to the bottom right?
ОтветитьHave been with Nvidia since the day i first custom build, i think its time to try AMD GCards.
Ответитьwhat case fans would fit and would you recommend the location of
ОтветитьFound my new base for a Hackintosh build.....
ОтветитьI really like your itx build, will you sell this mini pc?
ОтветитьNow put it in a real lunchbox
Ответитьare the cables include with the motherboard?
Ответить6700 or 6700xt?
ОтветитьCan I fit a Ryzen™ 5 7600X in this build?
ОтветитьGreat build. But same amout you may get a more powerful laptop, with a "free" screen and "free" keyboard.🤣
Ответитьis the low profile cooler enough for an i9 13th gen?
ОтветитьCan I install an RTX4070 or RX7800XT card, for example?? How do we search for small sized cards??
ОтветитьCould you tell me how long is riser cable for this case?
ОтветитьI came across this case myself a while ago. It is a great sandwich case. I built the following in it:
Asrock B550m-itx ac mobo
Amd ryzen5 5600 cpu
2 X 8GB Klevv DDR4 3600mhz Ram
Integral m3 series plus gen 4x4 m.2 nvme ssd
Sapphire Nitro+ rx 6600xt GPU
Thermalright axp-90-53 black cooler
Bequiet series 3 sfx non modular 450w psu
1 x id cooling 12015 case fan ARGB.
Shopping in new and used market did this for £590 ($675).
Can game at 1440p no problem.
I'm building almost this exact same PC. There's room to save a bit more money here, without sacrificing performance.
1. I'm using the SF 450 instead of the SF 750 because the former is overkill. You won't even be drawing 350w with this build.
2. I'm using the wraith stealth cooler that comes with the cpu, because it's small enough to work.
I used the extra money to upgrade to a 990 Pro SSD and 3600 mhz RAM instead of 3200.
I'm also buying a PCIE 4.0 riser cable so I don't bottleneck my GPU.
I'm surprised that you didn't add a low-profile fan in the bottom...
Ответитьtechnically dead AM4? AM5 is not really alive yet, if you want to use that analogy.
ОтветитьPretty good build, but it’s real do it with intel/nvidia combo, like i5, 3060?
ОтветитьWas the name Dwayne Johnson already taken?
ОтветитьWatch out about the 3rd generation riser cable, for newer gpu's only the 4th gen riser cables will get a post. Got this from experience with pretty close the same build.
ОтветитьCan it run elden ring
ОтветитьThis is how you will spread the paste on the processor in the garden.
ОтветитьI love the toaster look
ОтветитьI got a similar build, also m-itx mainboard, 32gb ddr4 ram, ryzen 5 5600x, rtx 3060ti, samsung 2tb m.2 ssd, 720W Corsair Modular PSU, Noctua CPU Cooler, 3 small and thin fans on top, 4tb hdd...
I want to change the noctua cooler with a corsair watercooling and replace the corsair fan with the noctua cooler.
Hi man, is the pcie 3 riser cable compatible with rtx 4060? Sorry i am not knowledgeable with this pcie. Trying to build a pc this version but nvidia
ОтветитьYour videos are great. I will build this one for myself. My wife wouldn't like a over the top RGB gaming PC in our living room that costs a ton of money. So it have to look sophisticated enough and shouldn't cost a kidney. :-D
ОтветитьCan it fit in that lunch bag? I'm going to buy this case, so innterested in what bag it will fit in.
ОтветитьI want to build a pc with this case but I have no idea if the parts I am picking are compatible because this case does not exist anywhere else besides amazon. How do I know that the parts I picked will work with the case
Ответитьthe riser cable is 3.0 and the gpu is pcie 4.0 did you have any issues or it works fine? l would like to buy this case
ОтветитьThese are always amazing but its hard to pass up those mini gaming pcs that have been on the rise in the past few years for $600-$1200
Ответитьmini pc vs pc
ОтветитьThe layout reminds me of my case, DAN A4 SFX. It's just a tiny bit larger than the A4, 7.2L vs 8L.
Ответить