Комментарии:
I can testify to the durability of the BERETTA 92 series of side arms. I have its predecessor the model 1951 and it is one of my favorite sidearms. I then got a Heel Mag Release model 92 that I honestly do not know how many rounds have passed through this pistol. Even if I knew an exact number, no one here would believe me if I said it.
ОтветитьMy grandfather bought two 686 duty pistols (a 4" and 6") from a retired LEO back in the early 90s. That LEO claimed that he had over 100,000 rounds through each of them and they still looked almost new.
ОтветитьHeeeeey❤ my glock is the first up🎉
Ответитьpoints for Solid Snake! HK mk23!
ОтветитьTwo of the best reviewers out there!
ОтветитьTwo inches 10 shots at 50 yds, ok prove it , put it in a ransom cause it won't do that.
ОтветитьDamn. Outlaw really DOES look like Bill Burr.
ОтветитьNo Sigs, i love my p320 xcompact
ОтветитьFyi p30s can be found for under $700. I got the so and ls for $500 and $600 used/new
ОтветитьP30 should just be tied to usp. The mark 23 is My most wanted.45 outside of......hmmmm....nvm most wanted for sure.
I feel good here because I own or operated all so therefore I'm your best friend and Jesus
You lost me when you praised S&W quality. My first handgun was a model 629 with a canted front sight. The gun would shake loose after about 50 rounds! My brother had a model 29 he purchased 10 years before I bought my 629 and it also had a canted front sight (both purchased new). So many times I walked into a gun shop looking at revolvers and after asked by a salesman if I wanted to look at a S&W I would say; "sure, let me see a large frame revolver!" I would then point out the bent front sight and the salesman would claim they never noticed it! This is the kind of delusion that keeps companies like Chrystler, Ford, GM and every European car brand in business! People so brand bias they can not see the flaws right in front of their faces! For over 20 years S&W produced large-frame revolvers with front sights that were not straight leaning to one side!
I have had several other revolvers, all Rugers and never a single issue and the fit and finish put my one S&W to SHAME!!! S&W; ONE AND DONE!!! NEVERE AGAIN!!! I'll keep my Toyota's and Ruger's, thank you!
The FBI fired 80K (20Kx4) of 40S&W and 120K (20Kx6) of 9x19 through Glocks w/o a stoppage; that's hard to beat. Their SWAT 1911s had 7 stoppages in 80k (20Kx4). One gun had 3, another 4, and two none.
ОтветитьThis is off the best communicate done I watched if you too say it it’s gopel
ОтветитьI dont know about Glock Perfection but Glock reliability is a real thing. Thats why I ise a 43x as my EDC. I could have bought anything I wanted but I trust the Glock name to perform when needed. . I own other brand pistols but for.self and family protection I use a Glock !
ОтветитьThe fact that this is “most reliable” and there’s not a single action in here is crazy, such as a Ruger Blackhawk that will shoot every time. Plus you can shoot really big bullets at high velocity…
ОтветитьNo highpoint? Huh?
ОтветитьIf it’s of all time I’d have to go with my S&W 586 and my EG Makarov! Both have been virtually malfunction free so far!
ОтветитьI'd pick glock 19 or 686. If it's not glock 19, I'd pick 686.
ОтветитьBro just edit ur title “ what does an HK guy think about reliable guns?”
Ответить357 doesn't kick why would you need recoil mitigation. I got like a 4 in Colt Python and that thing is super easy to shoot. I just need to find my 500 S&W rounds so I can try out my S&W 500 X Frame.
ОтветитьGlocks are gross. They're like the Burger King's of the gun world, terrible but sometimes you want to destroy your stomach and go with that bad taste that they leave behind. Then you pick up a cheaper Canik and get reminded of a better gun to price option.
ОтветитьI bought a 92fs a few years back and the extractor chipped after the first few hundred rounds. Of my sample size of one, Beretta is garbage. I should add that I also have a cz75 that works like a dream.
ОтветитьWhy is it never mentioned that Glocks will reliably jam if you don't hold them tightly? I realize it's impossible to not hold a Glock tightly unless you are old...injured...tired or have to shoot with your weak hand.
ОтветитьI doubt your choices, based on the look of your ceiling fan.
ОтветитьYou forgot CZ-75, Browning Hi Power, SIG P226, S&W M & P, and the granddaddy of them all (drum roll, please) Jimenez Arms any model.🤣🤣(Just kidding)
ОтветитьThe Mk23 and USP are virtually the same gun, operation wise. The USP was designed for the civilian market after the Mk23 was adopted by USSOCOM for the offensive pistol contract. They could be interchanged on your excellent and insert a Sig P226/228/229.
ОтветитьNo Glocks?????????????????????????????????????????????
ОтветитьSeriously?? No CZ 75 variants??
ОтветитьI was in the Marines when they first started transitioning to the Beretta 92. At first they had some issues with the slide coming back and not stopping. I believe they recalled them and installed a half moon slide stop. I liked the 92F but prefer my old .45.
ОтветитьFor years I hated the M9, it wasn't until I got to shoot a new one that I realized how good they really are.
Ответить10 years from : darned if the Taurus G models are just as reliable as the other G's
ОтветитьM&P 2.0 comes to mind for me. Seeing Garand Thumbs torture tested the 2.0 and it came out on top against several high dollar pistol’s. Even the Glock didn’t have a chance against it. Let’s not forget this other channel that goes by the name Honest Outlaw when he left the 2.0 outside in the winter weather for several months picked it up and yes it still went still went bang. This pistol should have made the list.
ОтветитьI'd take the Berreta way before the SIG.
ОтветитьMost reliable...
As of reading the title, if the Mk 23 isn't on this list then i quit.
"The most tested gun in the world"...
I understand the idea behind accuracy and reliability being separate.
Personally, I believe the accuracy of a gun. Is part of the reliability of a gun.
All the failure to feeds doesn't matter if the gun is not accurate.
Everyone always overlooks the Beretta PX4 Storm series. It was a government contract competitor with an insane round count between failures.
ОтветитьThere is a mistake on the guests t-shirt. One letter is totally incorrect
ОтветитьUsually like your vids. This is just derivative drivel.
ОтветитьNo Caniks 😥. I bought the Tp9 Elite SC after watching your review.
ОтветитьCZs not being on your list tells me everything i need to know about your opinion
ОтветитьNice gun safety pic
ОтветитьLove it!
ОтветитьI watch both of you. You both do really great videos
ОтветитьGood vid and hard to cut it down to 5. p226 for 3 tours in Afg, very high confidence in first round. Did dessert warfare course in Nevada and used M9, prior to that couse I was dismissive, the stuff that M9 ate made me a believer, long sight radius made itone of my keepers.
ОтветитьI think the S&W M&P pistol series is reliable as well, and would be a good choice for new buyers. $600.00 isn’t bad for a good gun…. Also the S&W SD9VE, to which is only $330.00 and still it’s very reliable. Heavy trigger but it’s very reliable.
But for only like $100.00 more than the M&P you could get the Beretta 92 M9A1 $680.00 or so.
P226?
ОтветитьI’m just surprised the Sig Sauer P226 didn’t make it on the list.
ОтветитьLove my USP. For how old the gun is and how HK can be a bunch of jerks I’m surprised they haven’t stopped making them. I realize they haven’t stopped making them cuz they’re popular. But still I recommend one to anyone that’s thinking about it!
ОтветитьI dropped my Glock in a lake and it still fired just fine. I cleaned it after that trip but it still performed just fine before cleaning. I’ll never get rid of my 48 it had sand and water in it and still took 100 rounds like a champ.
Ответить