Комментарии:
Picture will get better if you remove the protective sticker from the front of the camera lens.
ОтветитьGreat review!
I'm finding it difficult to see which hydrophonics part was printed with which printer. It looks like one of the parts has some ringing to it - is that true and if so which printer printed that part?
Also it is not possible to see what kind of defects youre talking about.. can you elaborate?
Can you say which firmware version you've used?
I have just ordered this printer and I'm hearing about problems with the quality control. Have you noticed anything out of the ordinary I should watch for?
Thank you for the review one again.
.....I also keep those little zip bags....but never use them again.
ОтветитьHow does this channel only have 31 subscribers? This is an excellent review. Thank you for sharing and good luck with your channel!
ОтветитьMight have missed it in the video, but how long did it take to print the hydroponic section?
ОтветитьYou have a lot of ghosting artefacts in those parts. I have the same issue with my K1 with black matte filament. Do you have tipps on how to fix this?
Ответитьthis is one of the least informative, ridiculously inept "review" videos i've ever seen. thisguy couldn't even figure out that he needed to remove the protective sticker from the camera lens lol. i know your channel is tiny and you can't risk pissing companies off when they send you free printers to review, but damn dude put some effort into being a good paid shill.
ОтветитьHi, nice video, bravo. What is the noise level ? Thank you
ОтветитьSpeed is not everything and I would never buy a Creality printer.
ОтветитьLooks to be a very nice system.
The Qidi X max 3 has the same speed, print volume and max speed, so this unit doesnt stand alone. It does have some nice features the Max 3 doesn't but the same can be said for the Max 3
Unfortunately, at Creality, it's not quality that matters, but quantity. They litter the market with a lot of garbage.
ОтветитьHi. Quick question related to the camera; did you remove the sticker in front of the lens of the camera? As per your video it looks like it still there???
Ответитьthe speed test is not for regular pla, silk, pla+ etc. there is a new kind of pla, low melt, like creality hyper, sunlu meta etc. those can be printed fast with great finish. also dont go 230 degree on pla+, it will look ugly and full of VFA. the slower the speed the lower the temp needs to be. highly suggest to print VFA tests first, so you know the speed+temp combo to use. totally user error but i see people complain because they dont understand how to use a 3d printer. glue stick is annoying but you can turn off the bed heat after first layer, so its comfort or 300 watts less.
Ответитьinformative but not enjoyable
Ответитьits competition isnt the X1 carbon..its the p1p or p1s at 599-699.
ОтветитьGood video thank you, for the artifacts it's due to the straps being too tight, it's a defect, I had the same problem and for the first layer and for the pressure advance you have to activate it in the camera section like that , he will do his test at the start of the print and it will greatly improve your print
Ответитьhola amigo una pregunta y la impresora K1 max le instalaran el modulo dispensario de color como las impresoras Bambú X-1 seria una buena idea poder disponer de varios colores en esta maquina ya que es muy buena y competiria con Prusa mk4 y Bambu X-1 en el mercado de impresoras de color
Ответитьi would love to get the stl for the planter
ОтветитьDid you peel the film off the K1 Max camera lens?
ОтветитьLets load random filament for the test print... surprise pikachu face when it fails with sliced model designed for included high speed PLA:)))))))))))))))))))))))))))
Ответитьjust subbscribed..cool channel..may i ask you a feedback cause m struggling wich choise is bettere between k1max quidi xmax3 and a p1s with ams....in term of quality that is my first goal...the others ar more usable cause are bigger but the ams is phenomenal to have.....m so confuse... thanks so much for your time and anyone else want to join this comment ;) cheers from italy
ОтветитьAbsolutely amazing video. I'm probably going to buy a k1 max
ОтветитьI'm a Bambu kickstarter backer, but I'm really digging the size of this K1 Max. It's yuge.
Ответитьgreat review
but the plane leveling must be done every time the printer is turned on?
How long it took the printing of the hydroponic section in the k1 max?
ОтветитьWhich is better for beginner, Bambu P1S or Creality K1 Max ?
Ответитьuseful (close up and in focus) print quality comparison could be improved otherwise very enjoyable review.
And not a lot of footage or info about the touch screen menu either (almost no reviews cover this in detail, I find it hard to understand why)
HA. I used to keep the bags but then I had a drawer full of them and realized I would never use them. Free yourself and trash them now. :P
Ответитьhonestly this was a great review, thorough and un-biased. W man, i subbed. Also some things u missed, i think you're meant to remove the top lid when printing low temp materials like PLA also there's a sticker on the camera that you're meant to remove. That's why the camera feed looks blurry.
ОтветитьI keep the baggies for coke
ОтветитьExcellent review! Thanks for sharing w us!
Ответитьtake the film off the camera lens hahahah
ОтветитьYup. Keep the baggies and reuse.
ОтветитьGot mine today. Completely imploded during initialization. Back z screw moved, 2 from ones dis not leading to it grinding to a halt at a 25 degree angle. Sending it back.
ОтветитьVery poorly presented.
Did not show which print came from what printer.
Mixing words.....K1 carbon....X1 Max.......Tongue tied.
OMG
Finally someone not getting on there knees for Bambu. Great video :)
ОтветитьThank you so much for the video and information. I got a steal of a deal on this printer and it'll be my first one so I'm excited to jump in but definitely want to take precaution steps so I don't damage anything and already have to buy parts. I've seen a lot of other videos that are on the Bamboo wagon so I'm glad to see more compliments on this one.
ОтветитьFirst of all who in their right mind wants wifi or camera on a 3d printer!!!!? What I print it is personal to me and in the same time I give the chance to some Greedy people to when ever they want they can do what ever they want to my Printer. If it is up to me as soon as I buy something I want their hands of my product that I have paid for
ОтветитьJust got the K1 Max and am having trouble uploading from app on phone or PC to printer. Have followed all the steps, but does not let me add device on phone app.
ОтветитьJust an fyi... Your focus is off. It focused on the box instead of you, so it was killing my eyes a bit when looking at you. 😅
ОтветитьHello. Great tutorial, but I am Having trouble pairing printing via bambu handy on my iphone. The QR code is no longer showing on screen and i dont know how to get it back again. Can you help???
Ответить