The Most Innovative LED Turn Signal Bulbs EVER | The Ultra i-LED by GTR Lighting

Me first

Turn signal bulbs probably don't sell very will in California. I haven't seen one used in years. 🤬

Wow 👏

it has red reflector use red bulb.

I’ve checked Toyota Highlander user manual it says all it’s braking blubs and rev blubs are no color (no amber or red)

Are they brighter than the carbides though? 🤔 can we get a tail/turn/stop LED bulb comparison video?

What a headache to do. I’m gonna skip and go to my local autozone. Why is it not prepared for me from you guys before it gets to me?

well, i gotta say that old bulbs look very nostalgic and warm. the way it gradualy lights on and off=) wish LED to do the same actually.

What bulb size I can buy for the Ford Explorer 2014 that have the Projector headlight, it’s a turn signal but also turn on when the door is open or the lights are on.

Funniest video ever guys,
30$ lights + 300$ for installation and adapters?
Any 1157's ?

I wish they made more for the 2021 Nissan Frontier

Just glad GTR is producing modern amber LED upgrades. Most stock incandescent bulbs are insanely ineffective [especially behind common clear turn lenses] in the tropical sun and don't even blink all the way off like an LED. Glad you compared i-LED to stock for a visual analysis.

I'm not too sure about that foam seal. Foam breaks down over time unless this is some special alien foam.

Wish these came in cool blue

I have a question, I used a similar system from VLEDs the Triton system, for my 2001 Ford Crown Victoria, I never did put rear LED signals as I was waiting on new tail lights. However with the use of the load resistor, I had occasional hyper flash issues. Would the incandescent bulbs and load resistors be fighting one another? As in would different voltage readings from LCM be thinking there is not any front turn signal bulbs.

Do those resistors get hot just like the traditional gold resistors?

Any plans for 921? That would be sweet

2021 Jeep Gladiator with halogen turns. If I activate the LED turns with my tazer, will I still need the inline adaptor to avoid hyper flash?

If using these for reverse lights on 2014 Ram 1500 would I need the resistor?

what part # for these led lights? your site has 2 part# led973 and the other led971 . what I'm looking for is the front parking light/ blinker for the same 4runner on this video

Not worth the hassle for me, I bought Morimoto X-VF for turn signals and with 500lm, they are perfectly bright. But yes, these GTR are amazing.

Where is the link for the GTR turn signal adapter that’s in the video? Don’t see it anywhere on your web page.

I want to see a direct comparison with this to the v6 triton

LED bulbs lights are better than the factory I just took factory later of mercury LEDs are better. I have no complaints. People can see those bright lights when you’re backing up. If they can’t see it is Steve must be blind Know what I’m saying Bruh

I want the brightest led possible for my rear brake and turn signal. Should i get the iled for my signal and the carbide 2.0 for my brakes? Or get the iled for both signal/brake light?

I noticed most of the upgrades are to trucks. Can you preview the ULTRA 2's in a 2016 Niss. Maxima's headlight. Maxima's have projector housings---and I have been trying to discover a LED replacement that works effectively. Can you sample the ULTRA 2 lamps in their housing...PLEASE.

Will the Gtr iLed switchback work on 2021 4runner front turn signals?

I saw a video on the GTR ultra versus a v-led bulb and the GTR Ultra dimmed after a few minutes

Is there a PY21W turn signal led bulb?

Where is the power coming from when some of these twist connectors need to make contact to power the bulb

Would a white i-LED make a better reverse bulb than the GTR Ultra reverse?

Any issues with these overheating? I have the gtr carbides and they act funny when it’s hot out.

What do u have for my 2020 ford expedition? Im waiting to get the switch backs

A simple question, do all cars need to add an adapter?

I have a 2017 GMC Sierra truck

What about these vs diode dynamics brightest turn signal led bulbs with their smart tap relay? I know this is your guy’s product. But I just wondered if these are way better than the diode dynamics or about the same? Also can you guys do the smart tap and strobing feature? Thank you so much! Or can I use the diode dynamics smart tap with your led bulbs?

I got the gtr i LEDs switchback probably wouldn't recommend them in my opinion I've already had to warranty out two sets first set one bulb started to get dim within six months second-set one of the bulbs got dim within one year.

I had the v LED tritons in my car before trying the gtr the Triton lasted close to five years

Pretty disappoined after buying these. I'm not sure if its these bulbs or if its the car I have which has a very sensitive lighting system. Im not sure theres another car in the world that monitors the current of the parking light, but my 2013 Dodge Dart does. If the parking light does not pull 5 watts exactly, it will show an error. I bought the i led 7443 switchback bulbs and the white parking light shuts off after 2 seconds. Going to try the VLEDS Triton because the i Led is a fail.

Making a new collar? You lost me there. Too much work for not much return

2004 Lincoln Town Car Ultimate owner here! Great review, demonstration, and detail on installation. I’m really leaning towards the switchback version of this product. Question tho, my vehicle doesn’t have daytime running lights so I’m assuming the switchback between white and amber will only work IF I have my headlight control switch in the “parking light” orientation?
If my low beams are ON will the switchback bulb be active or only when I activate the turn signal?
Hopefully my question translates clearly… Thank you and also thank you for the time and effort you guys put into your content for us consumers.

the only reason why i bought these is because i chrome deleted the turnsignal housing therefore the light being dim due to the housing not being reflective anymore. these work great if you retrofit your headlights

Do you have to worry about these melting the housing?