How to make your slow ebike go stupid fast!!! (off road)

No sound Andy 😢

thats the same motor i got from your site last year. i have put a kt controller with a 52v battery and 60a bms. i regularly run 3kw through the motor and it loves it. it does well over 35mph which on a push bike is squeaky bum tackle.

turn the video off for abit its note uploaded at max res

Nice and simple, I like it

5.0 mustang. Let's go Andy 👍🤜

I've put this kit on giant bike it very good need a better throttle the clamp over one ..i use level 3 30mph would recommend

Try playing it back at 1.25X speed.
If you can ride that fast without a motor, you'd still get dropped by Wout Van Aert!
Just saying how effing fast these pros go! :)

If that bike is aluminium, it is very unsafe to bend out the dropouts. The stays can crack. Aluminium really doesn't like to be bent, especially not tubes.
It's absolutely fine to do that with a steel frame and completely forbidden with an aluminium frame. Doing this with an electric motor pulling 1500 watts is going to maximize the stress on those stays.

46mph with no weight on bike is not top speed. bbhsd 1000w with no weight on my bike with 48v17ah battery goes 70mph in reality my fat ass goes max 38mph

Nothing says quality like heavy duty cable ties keeping your battery on

Nice build from stock "off road " awsome 👍

Nice tunes 👀👀😳💯🌄

Yo kit is puka great vid as per usual man, but for us ntters who like mental speeds, are you planning on updating your site to include sabvotons and qs205s in the future as like you had before listed before the revamp of the site? Hope so man

Guess can sort of jb weld a, noggin under the battery so it sits a bit inside the holder for more support

Hi Andy
I have a display like this one. Do you know how to reset the trip odometer without reseting the main odometer

Sent you an email,.it wouldnt let me post it here, kept saying " remember to stick to our community guidelines" and deleted my post.
It wasn't nasty, it was an apology.

Yeah it's hard to find a universal way of fitting everything sucks you gotta use shims so much I had to for my Crystalyte kit.

Good video Andy, I like my e-bike the way it came, but yours mods must interest the viewers who like "SPEED"

I have a 52v BBSHD 1.6kw and 24ah with Panasonic GA on a light little 26" urban bike, I restricted the controller to 15 amps from the stock 30 for fear of my Sturmey RK8 hub exploding, just now it's running something like 650 watts nominal max and my bike still flies up 20% gradients at 25mph so I don't even feel the need for the other 15 amps. On the flats/commuting and generally I ride at 16-20mph as that's still faster than your average cyclist on a non ebike and I keep the 40mph blasts for the disused railway paths and offroad stuff in the woods and I never have issues with Police or the public hating me. Show some respect.

⚡🤙🏼⚡

hi i just got a new hard tail mountain bike and was wondering if the Kirbebike's 1500w and 2000W MTX Rim Ebike Kit will fit my bike which is a Vitus Nucleus 27 VRS Mountain Bike in a meduim 17inch- or 43.2 cm as i saw dudestuff fit kit on a vitus but not sure what size his was cheers

I swear I can get this kit up to 72 kph on a flat road full charge man i love this kit just can’t figure out how to change it to mph 🤯 doesn’t bother me tbh eyes are usually on the road not the speedo haha 😂

💙👊😎

nice video, i actually ducked when you were going through the low trees 🙃

Hi Andy, it's good to see you doing what you are known for, which is building fast electric bikes 💯%👏🏽

What Tyre pump you using mate ?

Is the new Sine wave controller compatible with the previous 2000w hub motor and display???

I have one of your big kits but you really have to take care of those big heavy hubs on pot holes etc.

The forest rides reminds me of the speeder bike scene in Return of the Jedi.

Was it not much better to buy a full suspension mountain bike with high end parts
For half the price

To me destroying a brand new ebike to build this.
Is a big no-no in my book
I would rather give it away for free.
Which I have done before
Then destroy it for nothing.

Have a 2021 zero 10x 2000w e scooter hydraulic brakes and upgraded front and back suspension, really want to do a swap for an e bike peddle assist

I like the way you counter your ebike carbon footprint with a 5.0 - yess! 😂

Andy with not an unlimited build budget but a healthy one how much would u be able to make a surron killer for do you think ?

Do these controllers come as standard now on the 1500-2000w set

“ this 250 watt 36 volt bike is rubbish” lol . Love the honesty about weak ass e bikes😅

Hello Andy,

what kind of hill can one of these tackle gradient wise please?

Thanks 😊

Love this, building my own at the moment however I have been waiting 12 days now for a 48V battery from kirbebike for UK delivery... is that normal? My motor etc. arrived within 7 days

I want to build an ebike oneday 👽👍

Hi Andy is this one of your new kit? Can you show us the inside of the hub motor? Will it recharge the battery downhill? Thanks

Hi Andy how much it costs all together for conversation with your motor n parts

I love a over build. I did this with my older e-bikes! Fun builds. Fast ride

why did they have to add shims to the cassette if it was wider than the drop outs after adding the shims?

Andy, I am loving the kit, but unfortunately I was trying to adjust the settings and accidently set a password that I didn't write down and now I am locked out of my bike. What are possible solutions?

Questionen, im on the Internet site and the 2000w weel has this 3 cabels and the big White one. But the new Controller has Other cabel Connection. Bro ???? Help pls. When i buy the 2000w kit i cant use them because of the new Controller or the old weel write? 😢😢😢

Any fast bikes going for around £500 plz