Комментарии:
Oh, Jennifer, I love how you call your husband "nerd"! I don't know about the other people, but I sense so much love in there! :P We are a nerd family too so I get you 100%! Aren't nerd husbands the best? hahaha at least that's what I think! Thank you for the video! Sadly, my cutting plates got warped from the first use, not sure what i did wrong. now i have to fix them because they are bending my dies.
ОтветитьThanks for these tips.
ОтветитьThis is wonderful information, thanks so much for all your research and expertise Jennifer. I must purchase the green Gemini plates.
ОтветитьThank you! So glad I found this channel!
ОтветитьI need help with mine if you can get back with me !! My rollers ain’t working like it won’t grab my sandwhich and pull it through ? But it turns on and all lights are on
ОтветитьThank you, thank you, thank you. Most frustrating day crafting yesterday, with my gemeni warped plates, and new plates. Love this machine but yesterday was a challenge, I ordered the double sided plates, and will try the hot water method.
You would know the best remedy!
whats the differemnce between a clear cutting plate and a double sided cutting plate?
ОтветитьI purchased the double sided Gemini plates and set them up as you did. My die cut into the new dbl sided plate deeper than I thought it would. Is that normal? It might save the clear plates but I’m thinking I’d go through the double sided ones quickly?
ОтветитьI just tried the boiling water cure for a big shot purple cutting plate and a clear plate. I followed the directions exactly and it did not work. The plates had been used as recommended and were only lightly used when they warped and bubbled . No amount of heat or pressure seeme to make a diffeence. Not happy with Sissix or the plates. I read through many of the comments and found others who had the same problem with Sissix. I also sent an e-mail to Sissix about the problems. Not happy with the quality of the cutting plates and unsure of what to do next. I know products wear out but I am not an intensive crafter. I just like to make a hand made card here and there. Is it time to cut my losses and head back to the dollar store?
ОтветитьI just started using die cutting stencils & love it! I have a very small "Craft Buddy" machine and the plates warped - SO I am so happy to have found your video and will try to unwarp my plates ASAP!! You & your husband explained everything in laymen-nerd terms - AWESOME!! Thank you both!
ОтветитьHello Jennifer, I knew you would have the answer to my warped cutting plate question! I fixed it right and away and now they look are work wonderfully. I enjoyed your nerdy husband and it's great to learn something new. I will never put plastics into an oven.
ОтветитьI use the white cutting plate & the raspberry plate from my old grand calibur - works like a charm
ОтветитьSo, I am new to die cutting. I didn't know if I was going to like it or not so all I did was buy the Gemini Mini. The shim that comes with it is together, not just one piece, like the ones you're showing in the video so of course it is smaller colleges for the Gemini Mini my question is, will this same technique work on that small shim as it's doing on these large ones? 💜
ОтветитьYou answered soooo. Many questions i had about die cutting Thankyou from a technie nerd
ОтветитьCan you use those sandwiches you showed in the bigshot?
Ответитьrewatching. as my plates are desperate. best video ever!!
ОтветитьCan you tell me if the two sided green plates would be OK with fabric because that's what I use my gemini for thank you
ОтветитьI’ve heard someone suggest a thin layer of PVC, the sort of thing they make packaging for a duvet or pillow, that thick shiny stuff. It takes the cut and protects the plate. Not sure whether it also prevents warping
ОтветитьThank you for this great tutorial! I just found it and have flattened four plates this morning, using your technique. Beautiful results!!! And I love that Ken gave us the ‘why’ behind why and how this works without releasing toxic fumes.
ОтветитьThanks Jennifer. I watched this years ago and found it useful to come back to!
ОтветитьMy Magic Mat was warped and instead of using a heat gun to flatten it out, I put it in the oven on the lowest setting (170) for 5 min. and take it out and put on marble countertop to cool. Have done this multiple times and it still works great
ОтветитьI’m brand new to die cutting without a cricut and my first project with an embossing folder resulted in me warping my brand new plate and folder. This is so helpful thank you so much!!!!!
ОтветитьThank you Jennifer for such a great tip. Can’t wait to try it tonight.
ОтветитьI taped my gemini plates to my double sided plates back when you did your first video about doing this. I have had to redo the tape twice since then, but it has probably been at least a year or more since I first taped them. I have to say this has definitely worked!! CC's Gemini II has a roller that maintains pressure through the whole length of the roller, which is suppose to prevent some of the warping. Will you ask your resident nerd to comment regarding the possibility about this helping to prevent warping, or is it strictly caused by thecontinued cutsinto the plastic plates that weakens the structure of the plastic causing the warping.thank you for all your tips!
ОтветитьDo you have a fix for warped embossing folders?
ОтветитьI had 2 very badly warped clear plates and a warped shim. I tried your system but gave them much less time, I could actually see them levelling out, but it still worked 😊 thank you for the idea.
ОтветитьThanks for this video and the explanation from your husband, I just bought a platinum 6 and it looks like my plate is already starting to warp after only a few cuts and I am guessing that is normal. But I have a way to fix it now when it gets bad. :)
ОтветитьThank you so much for this tutorial. I have a mini die cut machine that I can't buy replacement cutting plates for and this technique worked so well to fix my cutting plates.
ОтветитьI use the advertising cards that come in the mail. Many have a coating that adds just that little bit of thickness for a good cut. The thin kitchen cutting mats from the dollar store work well too.
ОтветитьI excitedly tried this and....all it did was waste my time, effort, and water. :( Not one bit of change with a sizzix plate. So disappointing.
ОтветитьThank you so much!! I just finished fixing my very badly warped plates. I especially had great results with my magic mats which had gotten out of control.
I really appreciate the education you have provided over the years❤
Do the double side plates work with Sizzix to.
ОтветитьDon't waste your time with boiling water as it doesn't work. I've tried it multiple times with plenty of weight. Still got the same warped plate I started with. It also doesn't do anything to clean a plate of the paper cutting a die leaves bhind.
ОтветитьI💖 nerds.
ОтветитьVery helpful! Thanks for the tips.
ОтветитьThanks for warping FYI and as for the nerd husband ...i will take a nerd husband anytime !! Thanks Hubby...
ОтветитьThank you, thank you, thank you!
ОтветитьGreat info tks
ОтветитьThanks for the really great tutorial! Great idea. ❤
ОтветитьGreat video. *Notice on the first plate dies were only put in the center of the plate. Plopping dies always in the center will cause more warping. Dies should be put all over the plate — edges, top, bottom, everywhere. That’s something Crafters Companion explains in a video that I can’t find.
ОтветитьBless you!
ОтветитьIT WORKED FOR ME!!! THANKS !
ОтветитьLove your suggestions. I am currently using a resealable plate and so far so good but have plates I can now fix. Thank you
ОтветитьHi Jennifer , I’ve just tried this and it worked but unfortunately it’s a bit like my shape at the moment it shrunk and went wider so now I don’t have a plate😢 this also happened when I did try the oven method before I listened to your resident Nerd ( won’t do that again ) where am I going wrong ?
ОтветитьDoes your boiling water method work for magnetic plates?
ОтветитьI've tried it a number of times, on different mats and none of them are flattening. I don't know what to do.
ОтветитьAwesome video and wonderful tips! Thank you both!!!
ОтветитьThank you SO MUCH for all this info! I'm excited to fix my warped plates! Question everyone else already knows: What's the tape you're using to hold your dies in place?
ОтветитьGreat video. Completely new to a Gemini machine. Bit lost at the minute but that was great and especially for the warping plates. Thanks.
ОтветитьThis is good tips my machine is a Sizzex and one of my plates cracked nearly all the way across yesterday
Ответить