Poor Man's 2FIDDY | TCMMRC Concept 195 Sub250g UNDER $100

Can i use 4s?

Hi. Does it have a reciever ? I can't figure out how to connect it to radio.

Would this be able to fly with a 4s 1300mah or 3s 1200mah? Not looking to do anything crazy with it just cruise around.

Looks like a perfect parts donor for a budget rekon 5. I'm tempted to just buy this and transfer it over to a rekon 5 frame, maybe new vtx, express lrs and it should be easily able to go long range!

What connector is the battery wire on the drone? Thanks

Albert: Tries to explain "flick and throw" without using word "flick" or "throw". "You know those moves where, you hit the throttle and then go to zero and use mass and momentum". Just ribbin ya. Thanks for checking out the Casino for us!

hello new to this, would this connect to a frsky d8 receiver? I don't see anywhere on the page and can I set my rates and its ready to go?

Yo man was the drone pnp or did it come with a receiver if it did which receiver

Now the upgraded parts have a 25amp with a 2700 kv

Thank you again for sharing your view and the weight of it

I think eveybody should have a 5" 249g lighweight quad and a 5" 499g power quad. :D

Instead of set a throttle limit to 80% you could use a 3S battery instead of 4S ? A 3S battery has 75% of the voltage of an 4S battery ?

do you think the jello comes from the bad quality camera 3dprint mounting or the frame itself? if I just replace the camera mount, will it remove the jello?

Do you have to put your own rx on it?

Another great review, thanks Albert! Currently have a Tyro79 that I am learning on and wanting to get a list of options for sub-250 quads to move up to. This looks like a good option, will check out your other sub-250 grams... Cheers!

I'd say ignore those that screw up dump. They've been warned, and it's the best way to learn...

UF6 from this company looks great to review :)

i dont believe there's a "poor man" in this hobby haha

although it's not too expensive but it's cool

Would this be any good for racing or is it too light in the arms.

Can this handle 6s lipo? A little bit confusing as the Ali link in the descriptions.
The F4069 FC is for 2~6s and E2069 ESC's Peak current is 25A 10S??? in the picture but 2~4s in the description.
And the motor parts, max power is 400W and 2-6s they say. What is your opinion, Albert?

That 20a esc is going to die immediately lmao

Ain't gonna lie, I have to watch ur vids at 1.5x speed usually, but that's probs to do with my impatience than anything 😅. But thanks to you, Oscar Liang, JB, and Nick Burns I was able to get my elrs mob7 up and running, and after I broke it, was again able to fix it thanks to yall.

Anyways just wanted to say thank you so much for your contributions to this niche!

Ohh dammmn another video of a less than a 100$ quad from tcmmrc, it's just crazy the prices they are selling these quads for!
I'm saving to buy one of their quads that has the 40A ESC, and fly 6S with a throttle limit and maybe swap frames!
Amazing review and ideas for using their cheap quads!
Cannot wait to see the other quad transformation to DJI!
Awesome video as always, Albert! Keep up the great work! 💪

i like the looks of that. thanks so much for these budget videos for guys like myself that cant afford much so i really appreciate it thanks for sharing albert. ps id provide the cli dumps with a disclaimer that its being done at the owners risk

Any good for long rang flying with GoPro camera cheers looks.imteresting

Man really really tempted here. Maybe I could run 4s liion pack and do some super cheap LR stuff? Or just rip it and let it explode just for the fun 😃
Either way I really like it. I have a spare 20x20 mamba stack (I think it’s 40a🤔) could pull that and not worry bout it 😁 🤷🏻‍♂️

It's gonna be hard to fit that stack in the 2fiddy frame. I tried putting an ESC/FC stack in mine and it wouldn't fit unless I used taller stand-off. With taller stand-offs, the camera cage doesn't fasten to the top & bottom plates so you'll have to zip tie it to one... Frustrating ordeal lol. I ended up going back to an AIO board on my fiddy.

What is the max out out power for this quad and is there a build video?

Hmm, looks like with a 650 battery you might be able to squeeze a vista in there and remain sub250. That would make for an interesting drone next year since it would not need remote ID. On the other hand all my other ones would need it, so I will be getting a module assuming they actually become available.

Is that a Glock on your desk?? …..my bro 🤣🤣🙏🙏🙏

this one looks like its super fast. its a good price even for just part to swap to a different frame.

Good to see these cheaper options in review videos. Ignore the haters. Those are just fake accounts from iFlight. Haha!

Hello Albert. Great review of a budget drone. This is a helpful service for people who aren't necessarily noobs but are on a budget. Allows more pilots stay in the air. Would these parts be better suited for the 4 inch 2fiddy frame due to the high kv? That would be an interesting transfer. Happy flying everyone. 🤓

Simply tell them before you try your settings to type "diff all" and save that to a file called "AlbertKimBrokeMyDrone.txt" 😂

Not sure if you did this one for a review/ TCMMRC 5-Inch Xtreme 210 Drone Long Range FPV Racing Drones Quadcopters F4 600MW with Camera HD Professional. if you did can you send me the link? Thank you.

Looking at the parts, might try getting this and swapping the frame to the Tbs source pod racer frame. Should keep it under 250g while improving the strength of the frame.

As long as you do write BF version and the hardware in your version please provide cli dumps when you have somethings that works. (If someone tries it with another hardware and bf version thats not your problem. Just put a disclaimer and properly describe hardware since they do change the hardware from time to time on the same model as you said)

Sold!! Definitely picking this up for spare parts.

Great vid. Can you do a runcam thumb pro vs hawkeye split v4 vs hawkeye fjrefly lite v2 comparison?

Of COURSE you would.. AFTER I build an actual 2fiddy 4" LOL.. The ONLY thing I don't really care for on the 2fiddy frame is the fact you have to take it all apart in order to just get to the stack.. I would be interested to see how that holds up after a few crashes. I like stuff that has replaceable part J.I.C I have some uncoordinated landings and break something. It seems like a lot of people these days are buying the cheap prebuilts and stripping the parts for better frames which is a good idea considering the prices of current FCs. Keep up the great info and thanks for the vids AK!

Thank you for making videos on cheap stuff. It is extremely helpful to know what you signing up to when going for one of those.

This is quite common in products sourced from China. The parts are available, then "not." Find a new source. etc. Its probably not a bad quad. I suspect it is a flyable quad, but if your looking for precision flying machine, look elsewhere. Most people do not buy a quad with the intention of destroying it, but if you flew analog and everything else is in the 350 - 400 dollar range and this 100 dollar quad popped up, many people would jump on it. It looks like a decent little quad. If you want something to add to your fleet and want to just fly around. I think it's a worthwhile purchase. This like the other TCMMRC quads seem decent for the price. Sometimes people want the best, but do you really need the best, or something inexpensive to get you in the air. Although this "Frankenstein FPV quad." is cheap, it does come with some required adjustments, to make it work well. Great video, clear explanation on what to expect when flying this quad. Thank-you for taking the time to make this video, we do appreciate the work and time you put into these reviews.

Sweet! Thank you sir. Under 100 bucks will give it the zero care feeling i get flying tiny whoops.

Hi Albert Great video and review of the TCMMRC Concept195 I do like the frame, but I don't know about the maker ? I just purchased the Darwin 129 7in and I just finished replacing everything. Yet others are still flying there's without a problem. I guess it's what you pay for. Thanks again for the video and information

Awesome flying and review, Albert! 😃
This quad seems great! Any other model from them you can review would be great!
Stay safe there with your family! 🖖😊

I agree about a lack of consistency on parts lists on lower end companies. The frame looks interesting, but very fragile. Swapping out to the two fiddy frame is a cool idea. Thanks Albert, I wasn’t gonna spend any money today…🤪

Thanks for the review, love watching your videos

really enjoy watching a video without my kidney chucking inn danger