Тэги:
#nema_17_stepper_motor #contorl #driving #a4988_stepper_driver #tuorial #12v_stepper_motor #contorling_nema_17_stepper_motor_using_a4988 #bholenath_stepper_motor #a4988_stepper_driver_setup #arduinoКомментарии:
how do you set the stepping? i.e. full step, 1/4 step?
ОтветитьWhat is the biggest motor can I move by this driver?
ОтветитьSorry... it's possible to use just one power source please ? thanks
ОтветитьI am having a problem with this code like compile and run. During to compile the code there some errors. and Also when adding the code to circuit there is another problem. Contact to me please
ОтветитьThanks for the effort - but why is EVERYBODY using the same godawful music?
ОтветитьCould you hook up 12v 30 amp to 1 driver
Ответитьwhy do indians have no idea about music??
ОтветитьChange the code to delaymicroseconds(1000) instead of 500 if your motor feels gutless but still spins.
ОтветитьCan i use the same Code and circuit for tmc2208?
ОтветитьIt's something wrong if I do not use a capacitator?
Ответитьhi,
if you want to use this circuit in a car lets say, what options are there to replace the 5V volts for the circuit coming from the usb cable ?
Thanks for the video, after week of swearing wit L293D I made the motor work wit this driver at first connection. Please next time use other music, but anyway
you saved my nervs .
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x20
An error occurred while uploading the sketch.This is the error I received while uploading the code. Please help
Motor price???
ОтветитьCan the motor run in one direction only
ОтветитьIf usinh potensiometer and control movement from that?
ОтветитьDon't forget to set the driver current. Oh hang on, you did.
ОтветитьI want to hear the motor noise, why does every video have this ridiculous music?
ОтветитьIn your description you have listed in your gear a mic, instead of this crappy music why not use it!!!
ОтветитьMy one stepper motor is 12volt and another is 3 volt, now my question, can i run both stepper motor with this driver?
ОтветитьIf I want to power 2 12v 1.7A stepper motor together So how many volt power supply should I use ?
ОтветитьGood music but poor explanation.
ОтветитьCan this be controlled using a raspberry pi system?
ОтветитьHi the motor I ordered has 6 pins and no wires 17HS4401S-PG100 How to drive it? I plan to order an A3967 easydriver for it I hope it will compatible, need it for planetary purposes
ОтветитьHi there, one question: I just want to make one of these motors turn, without any stepping involved, but with variable speed controll through a potentiometer. So what do I really need besides the motor and a power supply? Cause I have bought the Nema17 motor and a 12V 5A power supply. Guess I also need one of these drivers, but do I really need an arduino or something like that as well for this simple task or is there a way around it? Cause I don't know anything about all this other complicated stuff, thought I can simply connect the power supply to the motor with a poti in between and good is, but it's not😬
ОтветитьI would like to adjust the engine revs using various buttons, does anyone know if this is feasible?
ОтветитьGot mine working following your great step by step wire connections, thanks very much 😊
Ответитьhello, in motor's rated voltage 2.89V in datasheet but your motor power suply 12v 😮
ОтветитьWhat is the name of the song you use in the background?
Ответитьwtf
ОтветитьI want lift 9 kilogram with that driver and step motor. Is this possibile? Thanks for answering!
ОтветитьCan i replace 4 Wire Stepper Motor with 6 wire Stepper motor?
ОтветитьHey pls read this
I have seen some silver metallic things on top of the a4988 which has some unique design and that one has a red coloured PCB may I know what to do with that
Quit using cringey music. This is technical stuff for learning or work and can't focus, man...But thanks for the help.
ОтветитьHi, I have a curious behaviour. I have two stepper motor that I have tried the program with and one turns as expected and not the other. Does it means I have one burned stepper motor?
Ответитьhello,can i do it with mixly?i don't know c++
Ответитьvery nice thank you. i can test my motor thanks to you
Ответитьawesome
ОтветитьMust it be a 12V, 5A power supply ? Can i use a 12V, 3A power supply instead?
Ответитьgood job
ОтветитьNice video, bad music.
Ответитьthanks for the video. but what about the enable pin ? shouldn't the enable pin also be connected to VCC ?
ОтветитьYou should include "Free Shitty Music" in the title. I didn't even watch beyond ten seconds or so. Don't care if it's awesome or not. Sure I could mute every shit audiotrack I encounter but video creators could just do the entire planet a favor by not including it to begin with.
Ответитьbro your amazing, i had some questions may i get your contact please?
Ответитьthank you so much
ОтветитьHow to check watt of stepper motor
Ответить