Комментарии:
This was incredibly helpful at diagnosing and repairing my 20 year old pro model. Thank you!!!
ОтветитьHow do you get that ring back on?! Need the specific tool?
ОтветитьThank you
ОтветитьDoes this video apply to the KSM5 (bowl lift 1996 model)?
ОтветитьA good pair of snap ring pliers that fits the ring properly will make it even easier than this video shows, because you simply expand the ring until it slides right up the shaft and off. Make sure you have the towel at the top, because he's right they will go flying into the next county! Lol
On this you can use either bent tip or straight tip snap ring pliers, but it takes pretty small tips.
Some you can get with interchangeable tips, and they usually have something small enough for these, but make sure it's a decent pair, a lot of the cheap ones have misaligned or badly formed tips.
This person harasses and scams people
Ответитьwhere is the link to part 2
ОтветитьLooks like you really know this mixer inside out. I have the same one as your gray 600. I was mixing something and not watching and the mixer jumped off my counter. The 3 prong plug ripped out. I turned off the electric and pulled out the grounding prong still in outlet. So now I need to replace the cord. Do you have any video or advice on that. I pulled off the housing and I don't really know what to do. Can you help me???
ОтветитьI loved your video. My machine is now spinning again but now it is so loud. Any idea why?
Ответить👏👏
ОтветитьWhat material is the chassis of the Kitchenaid Professional 600 made of?

Thank you for helping me become a Mother’s Day hero today!! I watched the video and ordered the kit a few weeks before Mother’s Day today!!
ОтветитьRemoving lock ring is stupidly hard wtf
ОтветитьSure glad I found this! Had to stop and run to town for the snap ring pliers but hey, I've got em for next time!
ОтветитьHey Mr. Mixer! Would you be able to do some videos on the Proline 7qt KSM7581? Seems like you don’t have really any videos on that model and I’m curious to see what maintenance is like on that model and whether the spring kit/snap ring fits?
ОтветитьMr. Mixer, you wouldn't happen to know what the last model of 6 Qt KitchenAid mixer was that didn't have a chip board, would you? I'm interested to find a model like the 600 (in capacity and power) that doesn't have any kind of computer board.
ОтветитьWhat chemical can I use to clean the gears? I'm looking for something that will dissolve the OEM grease. Brake cleaner? Gas? Alcohol?
ОтветитьExcellent video, thank you! 👍
ОтветитьLove the videos. High recommend this addition to future re-greasing tutorials: when introducing tools, please include paper towels and alcohol (70%). I was following a video yesterday and cleaning while I was watching and when you introduced the alcohol, I started using it. It was a game changer. Would have been good to know earlier in the process while I was cleaning other areas of the mixer.
Tanks for all the info!
Mr. Mixer is amazing. He truly knows his stuff. I am so happy I found his video. HIs step by step instructions are perfect. Thank you for saving my mixer!!
ОтветитьI replaced the worm gear assembly in K45sswh , the dry run is ok but as soon as I load the dough, the nylon gear breaks
ОтветитьI have a Kenmore mixer, it works for 5 minutes and then it turns off, is it a problem with the old grease transmission? for overheating? Thank you, I'm from Honduras.
ОтветитьMost EXCELLENT video. Thank you. Question: I just purchased a KV25G0X - "Professional 5 Plus" - and the attachment has a disturbing amount of play, and I'm wondering how much is allowable, before I send it somewhere (are y'all an authorized warranty repair location ?). I just wonder, how is this possible with a brand new machine (at least, just out of the box, and run no-load).
ОтветитьHi do you repair Kitchen aide stand mixers?
If so how do I send mine to you
Thank you
Thank you for taking time to make such a helpful tutorial. You do a nice job of explaining the process.
ОтветитьI believe my model has a circular metal piece that goes on the shaft above that part. that is really hard to take off. Have you ever seen a model like that?
ОтветитьYou're missing a key part of repairing / rebuilding these mixers.
ОтветитьGreat Video... I got my 600 torn apart and diagnosed to need a Worm Follower Gear, Gasket & Grease... I should be up and running as soon as I get parts transported from you to me! Thanks for the Thorough Video!
ОтветитьI think my question is answered, but the Professional 5 plus has all metal gears correct?
ОтветитьIf the pin above the follower-gear is partially sheared, it will NOT be easy to get out and will need a punch.
ОтветитьHow much to clean and fix older model kitchen aid
ОтветитьJust have to say thank you! I was regreasing and putting a new gasket on my mothers mixer and was having difficulty when putting it back together, thought I had parts in the wrong area only to realize that I put a whole bunch of grease in the hole for the rod! Ooops
ОтветитьAwesome video! Thanks for showing me how to clean the grease out. Most videos I viewed pulls the gears out, and then jumps to clean gears. And thanks for explaining that the C-clip can actually fly off if you're not careful. I didn't realize how tight that was. Thanks for the details all around.
ОтветитьThank you for the easy-to-follow video! Our mixer is once again running smoothly.
ОтветитьI'm in EUA, but I Live in other country and need to buy The gear peaces, I world like to Know the série numbers them. THANKS FOR YOUR ATENTION!
ОтветитьHi, please, do you know the parte numbers of gears? I can to change them, thank you so much!
ОтветитьMr. Mixer, I need your help!!! I've got a Professional 6000 ( I think that's right) kitchenaid mixer. It's in Asia. So I'm trying to fix it myself when I return to Asia. I think I need the Motherboard replaced... not sure. Can you direct me to where I can buy this part?? the model is KSM6573CER. Any direction would be greatly appreciated. Thanks!!!
ОтветитьHad to call Mr. Mixer after a tab broke off my plastic housing. He was super helpful! Thanks again!
ОтветитьGreat video, I just purchased a new Professional 5 Plus machine and there's a 2 second lag when turning on the mixer...Is this normal? Also, it has a slight grinding noise? should I get it replaced?
ОтветитьI have a 45SS and stop working suddenly,I buy it second hand,but Which models include the thermal fuse??,Mine must have one???,thank you very very much my friend!!!👍
ОтветитьHey Zach, my tiktok was shut down for some reason, so I can'tDM you. But I need to replace the gear under the pin. What is it called? No worries, I'll order it from you 😁 But I expect a drawing this time!
ОтветитьHey Lovely Mr Mixer! Could you go ahead and stop saying go ahead in every sentence? This Americanism tortures my untrained European ears to death. Keep on a great work! Yours, sincerely.
ОтветитьHello! Thanks so much for your help. I have purchased a few components from you in the past , and your videos have been super helpful. Unfortunately I keep having issues and maybe you had some insight? It seems like whenever I knead anything in my mixer, something pops loose and the gears detatch. I believe that the small ring clip keeps slipping out of the slot somehow. Its happened 3 times and is getting to be quite the process to have to keep taking this apart. Any advice would be greatly appreciated.
ОтветитьI Absolutely love your videos. They are quite descriptive. One question I have; you show the wear on the worm follower gear and it obviously needs to be replaced, but how often would you say that You've had to change the worm gear itself? basically I'm going to be re greasing a 600 pro series and I want to get a bit of a feel on how imperative it would be to order this gear as well. Thanks so much for your help.
ОтветитьMy kitchenAid 6 professional's head is separating from the base. HELP! It's 20 yrs old and works great except for this issue. Can you help?
ОтветитьOh my god removing that snap ring was annoying, can't believe that was the most difficult part. Mine was not budging
Ответитьadd that part 2 link in your description
ОтветитьWhere can I buy the thermal fuse?
ОтветитьIs there a specific kind of grease to use? Sorry if I missed you say it in the video.
Ответить