Комментарии:
I changed the gear shift connection, the problem persists, what could be the reason?
ОтветитьHow did you repair the bracket caus my Mazda 3 i 2.0 automatic does the same
ОтветитьI have a 2001 Lexus ES300 base that has a harsh shift from R to D from cold start, but the shift becomes smooth after the car warms up. I replaced the transmission fluid recently and fluid level is correct. Any idea what could be the cause of this?
ОтветитьI have a Nissan micra with automatic transmission (2002) each time it goes from R to D it stalls. I can hear a rattling noise when it’s in N.
When I hear this rattling noise I know the engine will stall with an audible bang and shake. When there’s no rattling noise the engine doesn’t stall.
This is getting worse and now each time I go from P,R,N to D, it stalls in D.
The only way it’ll not stall again, is if I start the car in N then quickly go to D.
Can any one help? Is it the gearbox?
Does anyone know what is the problem if it doesn’t give me the second gear it just gets stuck and then gives me the gear
ОтветитьMy 06 grand Cherokee does this shifting from drive and reverse. Drives fine but has a slight hum…. Any suggestions? No codes, no lights… no clue 😂
ОтветитьThank you very much
ОтветитьHello, I have the same problem with my 1996 Honda Civic. What should I do to fix it?
ОтветитьMy Mazda 2 has a similar problem, how do I locate this switch? Or could it also be the engine or transmission mounts that is bad?
ОтветитьI have this issue happens when I floor it that thing just did exactly same thing.
ОтветитьWhat’s the name of that part?
ОтветитьI have issue when reversing my kia cerato 2014. It takes a few seconds after changing the gear to reverse and jerks strongly. Also grar most of time stuck in P and have to push the shift unlocker every time. Do you think if that is same issue?
ОтветитьI just checked out the channel videos and had to 'subscribe' immediately once I saw it is a complete collection of diagnostics that anyone can do. It is like having a mechanic riding in my car, telling me the problems just based upon the sounds and vibrations.
Ответить1964 mustang does this. It did this when it was low on fluid (Automatic). Drive now is smooth, but Reverse does this and sometimes can stall. Mine doesn't have any computers and I only hear the thud with reverse. Got any suggestions? Thanks
ОтветитьI have this exact problem on 2004 Toyota Camry... But my parking light still works. Proffessionals said it's the ecu that's faulty.. can someone help me
ОтветитьHi im having a honda with this problem...it will clunk in reverse and ALSO there is a delay going from park to reverse of about 3 seconds...could this be the issue?
Ответитьmy 2004 toyota corolla is doing the bang in reverse. can it be the same problem ?
ОтветитьYOU KING MEN TNX
ОтветитьThis man is a true machanic
ОтветитьBAROM MEG MOST IS SIROK 🤣
ОтветитьI have a 2011 hyundai elantra with this problem. Is it this?
ОтветитьThat's your engine mounts or transmission mount
ОтветитьThat’s just an torque mount gone bad
ОтветитьMine jerks very badly when put in reverse and lightly when in drive…this happens mostly when the transmission is heated, so most times in the afternoon but not that much in the morning and evenings. It has damaged my inner CV joins. I thought that was the issue at first until I changed it and it stopped for a while and after a few weeks, it started again. It jerks so so badly and I don’t know what the issue might be…and to add to that, I’ve been consistent with my transmission fluid replacement periodically but I’ve never changed the filter…could it be the filter or the shift solenoid…I’m just tire, it’s frustrating and I don’t want it affecting my transmission system…please help sir
ОтветитьHey Motorcarnut. Your video is extremely helpful and intuitive. I have an 07 Daihatsu Sirion 1.3 auto and I'm experiencing the exact same issue. While the car is driving the gear change is smooth however only when stationary am I experiencing this issue. The difference here is that the number 2 gear light stays on constantly even while the gears change. I'm not sure why this is.
ОтветитьI HAVE 2009 TOYOTA COROLA FIELDER .. I WAS HAVING ISSUE SHIFTING FROM R TO D AS IT ALWAYS SLAMS.. THERE WAS OIL LEAK COMING FR TRANSMISSION .. ALSO.. THE MECHANIC SAID IT WAS BAD TRANSMISSION CAUSING ALL PROBLEMS... SO I CHANGE TRANSMISSION .. THE OIL LEAK GO AWAY ,, BUT SLAM SOUND FR R TO D IS STILL THERE....ANY WORDS OF ADVICE PLEASE....
Ответить2011 Chevy equinox shifts through the gears smoothly but kicks when you put it into drive or reverse. Now it's doing a thing where you put it in drive start driving 30 seconds later drive turns into neutral and you can't get into reverse either until you restart the car
ОтветитьCamry I have Toyota Camry if I put the drive he will shake if I put it reverse with vibrate if I put in the drive with vibrate what's the problem and I
ОтветитьCould it be an engine mount..???
ОтветитьVery helpful. Mine too does the same and is Hyundai Sonata V6 2009
Plz can you help out
mechs determine that but some will claim it is a bad transmission even if it is not Typically, what year models have that Neutral safety switch. and What make. My truck is a Dodge Ram 1500 2004 model. 3.7 liter V6. 4speed automatic.
ОтветитьSay , I tried having auto zone run a scan on my Ford escape 2008 , but there's didn't work
Anyways , what would cause a car to pull to one or the other side when the transmission shifts into second?
Sometimes it will pull right briefly then to the left briefly immediately as the transmission switches to 2nd?
I put some transmission cleaner greaser in the transmission today in hopes it will help with the rough shifts and slow down the ware.
Suppose without it being scanned for a code I'll never know for sure.
Hi, my huyndai accent 2014 jerks when shift gear P to R. I have changed transmission fluid and it was running smooth for 3 weeks and the jerks come back again. Can you suggest what should i do now?
ОтветитьThank you for the spot on problem and solution. Your P to R shifting is smooth as butter after you fixed the bracket issue. I bought a used 2014 Toyota Camry with same P to R jerk just 1 month back. The mechanic in pre-purchase inspection said its normal since its a 180k KM car with a cable transmission, not electronic one. If you think he's not right, please help on how to check for Camry transmission cable / bracket etc and how to fix this issue. My camry's P to R jerl is not as horrible as your car's but still it is a hard shift. The old owner never replaced trans fluid becoz the dealer said its a sealed transmission. Could the fluid be the issue instead? Thank you for making such wonderful videos.
ОтветитьHelo How are You!!
I hv the same problem!!when I change park to drive and reverse my car jerking forward and back ward!!
But I hv been changed my engine mount and gear box at the same time but my problem still continue and the oil level both engine and gear box are oky..!!but now my car mechanic told me again it’s a control box after changing gear box and mounts!!
Sorry how can I do🙏🙏
I'm driving my 2004 Honda Civic es1 right hand drive the car and it just stop when i put it in gear it's not moving it's not revving from inside of the car but it's revving from the engine room also no gas is going to the return i'm wondering what should i do i'm seeking some advice please 🥺
ОтветитьMy car is throwing a code P07BF and it’s doing what’s mentioned here in the video. What could it be? Please help
ОтветитьMy van does that but it does that while in gear and bumps in upon take off
ОтветитьWhen I put my Corolla in reverse it bangs and jerks. What I noticed though it only does that when I have the AC on. When ac is off it doesn't jerk at all in reverse or does it extremely lightly
ОтветитьI have a 2001 tracker 2.0. It does this exact thing. I recently had the transmission out of it to replace the rear engine crank seal. Since then, it has been worse. Could I have the adjustment on the shift cable wrong?
ОтветитьWhat about a click from Neutral to drive or neutral to reverse, Or from reverse to drive... I'm thinking maybe CV axle or engine mount ? And it doesn't do it all the time. car shifts perfect when I'm going on the road.. I do .. a little rough if I'm stopped at a light because it's automatic it wants to go forward could feel the car shake a little because of that I sometimes put it into neutral to stop the shaking... Anyway I've replaced all the engine mounts and the transmount including that torque mount.. there's only three points on a Mazda 6 gen 2 ... It's driving me crazy because I replaced all the mounts, but it's been a few years now... Maybe the mounts are bad again
ОтветитьMine does this from park to drive any thought it shows everygear on the dash… and only does it when i put it to drive thoughts?
ОтветитьLet me cuss this guy out! (My mechanic)
ОтветитьIve got mine golf 2004 1.6 fsi only when its run atleast 15minutes from cold start. P to D only. Not R. Shaking whole car. As well as When it’s shifting down from 5th to 4th.
ОтветитьAwesome information! Thanks, very well explained and grat. footage!
ОтветитьCould this be the issue on 2016 Hyundai Elantra only slight jerk from park to drive
ОтветитьHey i have honda cvt transmission , whenever i shift from park to drive or reverse from drive , the engine shudders , but some times it does not happen. What could be the issue ? Thanks
ОтветитьMy car is nissan altima (2.5)2008 . The problem is while im shifting the gear from neutral to drive the car get shake. But while driving and everything smooth. What will be the issue broo??
ОтветитьMy 2013 5.0 mustang has this problem as well as when I’m driving it will slammed down out of no where in like 2nd and first and revs the RPMs really high then sometimes I pull over shut it off and then it works perfectly fine. Do you know what this is? Also sometimes it will act like it’s in neutral when it’s in drive.
ОтветитьI have a 2013 Chevy Malibu and when I drive push the gas my car feels like it’s sluggish or dragging , and also feel like or want to shut off and when I change gears like drive and reverse I get a bad boom from the back like I hit a car when I took it to autozone it came out to be my air flow sensor but I don’t know cause of the sounds of the gears
Ответить