Комментарии:
Use cardboard as bushings
ОтветитьI use nail polish on the wheels to get grip
ОтветитьI think that guy with the rubber band means to use as nut lock
ОтветитьTry to make a wheel with hot glue stick😂
Ответить💜💙💕
Ответитьtry using a balloon as bushings
Ответитьplease stop moving around
ОтветитьDon't burn griptape with a lighter. You are inhaling toxic plastic.
ОтветитьUse chapstick as wax
ОтветитьYou can flush your deck down the toilet to have no deck
ОтветитьI’ve been using the rubber band bushings for 2-3 years
ОтветитьLight the nose of the fingerboard to make more pop
ОтветитьI tried gluing the axel, and it actually worked! It was hard to get the nuts on before gluing the axel, so if you can't manage to get your nuts on the axel just use some gorilla glue.
ОтветитьYou heat up the kicktail of a plastic board and bend it
Ответитьthe deck heat up trick is for plastic tech decks. Back in my day, we would heat up the tail and nose so we can bend them, let them cool, and now you have higher kicks
ОтветитьCan anyone tell me what trucks he has on his main setup
ОтветитьUse shrink tube over wheels for grip
ОтветитьSome one broke my tech deck do u think u can send me a finger board that hav3 a cool design please address bristol Virginia 605 portsmouth Avenue
ОтветитьYou can also use the rubber things in water bottle caps that keep pressure in as bushings
ОтветитьBernie’s the tire and do it or you
Ответить"griptape is actually pretty easy to get off without using some sort of method....." wtf lol. so how???
ОтветитьLock nut needs a retry with a proper tool!
For the tape on your grinding ledge trick use painters tape for a more slidey feel (perhaps.)
Can someone help me like bruh.. alright so the problem is whenever i put masking tape on my grip tape, the griptape has some of these random lines that the masking tape took..
ОтветитьFor keeping tech deck nuts on just put a really small drop of super glue on after putting the nut on
ОтветитьWho is an oh fan 👇🏼
ОтветитьI use the waterbloon one
ОтветитьBreak the fingerboard with hammer ok sooooooooooooooooooooooooooooo bye
ОтветитьGreat video bro, I’ve never really delved into this rabbit hole. But it looks very interesting. I wonder if there’s anyone that’s tried with their feet!?!
ОтветитьYeah
ОтветитьPut in the hot water and put in the cold water then leave for 1 hours
ОтветитьFor the heated tail you had to heat it up then bend it by pushing it on a hard object and it gives better pop
ОтветитьPeople be out here paying more money for a finger board than an actual skateboard like wtf
ОтветитьSorry I wasn't clear if u was using plastic board burn it a few min then push it up then let cool down and try
Ответитьcheerios as budget wheels is my favorite
Ответитьthis guy sounds like Aceu from Apex Legends lmao
ОтветитьThe heating of the board was to heat plastic board and bend it for more steep pop
ОтветитьThe rubber band water balloon bushings are the only bushing I usually use and if you use a pop it and a hole puncher it makes good bushings and you can do that for Lego tires and a hole puncher they all work
ОтветитьI'm pretty sure they ment alcohol prep pads
ОтветитьWhere can I get the 5 dollar inverted fingerboard trucks
ОтветитьThe guy means that u can bend the tail of a PLASTIC tech deck with fire 🔥
ОтветитьThe heating up your board hack does work because then you can kind of bend the tail for more pop
ОтветитьHey @TheGripsion I really enjoyed the video but I think the person with the "hack" :heat up the board for better pop meant heat up a Teck Deck and bend the tail more up to have a bigger pop
Ответитьyou should try to master the nolly heelflip in your next vid
ОтветитьTeak
ОтветитьYou lnow that car graphic its on trak
Ответитьi love this video - it helped me in so many different ways, thank you!
Ответить