Bosch GWS 18V-15 SC vs Parkside Performance PWSAP 20-Li D4 and Parkside Performance PWSAP 20-Li E5

The stalling problem might be a design choice to protect the motor from overheating. The more force you apply the hotter the motor gets (because it has to work harder) while at the same time it means less cooling (because the motor and thus the cooling fan inside spin slower).
I think they did this because there is no real overheating detection (as seen in the app), to compensate for this they just lowered the max cut off amperage to hopefully have less RMA's due to overheated motor's.

WHY CANT YOU BUY THEM IN THE UK.

В България перфоманс серията няма ли да я пуснат скоро?

YOu are not using a cutting disk on the parkside with the rebar and you expect it to cut ???

The perfomance of Bosch gws 18 -15sc is correspond to the 1500w wire anglegrinder . Said the Bosch official description. How many the parside? It is possible to the GWX 18V-10 SC is closer to parkside?

Die Maschinen werden alle vom gleichen hersteller produziert, aber unter anderen Marken vertrieben...

Can you tell me what are you using to see temperature?

You have the Parkside Performance PWSAP 20-Li D4 and the issue are excessive play in the bearings and small cable. Excuse me but what ist the problem you make a test with standard and then bigger cables. The power includes 50, 60, 70 amperes and then these small cables. Make it better because bigger cables costs less then 1 EURO and the time for changing less then 1 hour. What is the problem and then we can show if the small cable is really a problem.

phenomenal review. Love the temperature tests, cut length and perhaps the most the dissasembly!

Beh, senz' altro la Bosch è migliore ma considerando le differenze di costo/prestazioni è meglio la Parkside.

it's a protection that kicks in. isn't there an option in settings to increase load or turn off protection?

Why do you use a thick sanding disc and not a thin one when cutting? No one wants to waste time, material and electrical energy overloading the machine. The resource is reduced tenfold!

I would be terrified to use an angle grinder without a physical switch

Thanks for the content!
Can I know where did you buy the suport please?

Parkside 🤮🤮🤮🤮🤮🤮

Typical case when it looks good on paper and on the price label, but when you want to use it it is underperforming as hell and you just suck with it..

Może E5 jest uszkodzona, to aż niemożliwe by tak kiepsko wypadła 🤔

Nice video, but the test is not correct, the battery cells in the Parkside battery are significantly inferior in terms of parameters compared to the Bosch battery

Wow, great test, thank you!

That "break" of the rotation from Parkside, after turning off the power, to my grinder made the nut of the disc unscrew, because of the inertia, and the disc flew out in the air.
This is absolutely BS.

Made in Germany but Real im China!im Germany with global materiał!

Can you weight it them?

How about einhell axxio 18/125 angle grinder? is it any good?

Thank you very much, fantastic review. You saved me from buying this new E5 version as i live in France :)

Hello,
Do you have any information about the new 40V Parkside performance chainsaw?

Thanks a lot for the vid 👍. Must say the E5 version does not look very promising. The performance reminds me of my Yato cordless grinder which stops extremely easy, even under a small pressure. It is really annoying problem, with a 4Ah battery it is almost impossible to use it without cursing all the time ;). E5 stops with 8Ah battery, so I guess with 4Ah it might also be very weak. The other thing is this double-click switch. I am pretty sure it will be irritating to use as hell. Clicking it fast twice wearing some thicker gloves might be a challenge ;). And I am impressed with the Bosch, it performs almost as a corded grinder. Unfortunately the prise is impressive as well ;). I live in Poland, at the moment I would get four brand new D4s for one Bosch in terms of price, and when I look closer on some internet sales portals, would make even six D4s for the same amount. For the hobbyist like me, the choice is rather obvious. As you said, D4 seems to be the winner hear, decent performance for a very good price.

Would love to see a parkside battery kettle

Great test video. I have the Bosch, and is a great powerful machine. Parkside on the other hand is cutting corners with every new model. The older ones are performing better, regardless of the tool, impact driver, or drill. Even the case material is weaker on the new models. I personally don't buy any new tool from Parkside anymore. But I think they are very good choice for hobby purposes. And on the bosch you have every alarm shown in the toolbox app. Even on drills, every kickback stop is visible in the log. For me bosch, all the time, even if is more expensive. 👍👍👍

I have D4 version, and I prefer normal switch, not electronic. Great comparision, thank you.
From where you have an information what will be from parkside ? I'm waitning when pariksde figure out something like Milwaukee M12 FID2 :-) Because no one of volcano of intelekt there don't hit the idea of it xD

E5 has been made by OWIM, Kompernass or Grizzly Tools?

I think this is the best video from you so far! Great comparision.

Great work 👏 thank you for sharing with us , God bless you

No idea why wouldn't they just fix the "rattling" sound and change the position for the button to change speed bellow the speed indicator, like on the E5. Would like to see how much abuse the power button can take on the E5 before it starts giving trouble.

Здравей при какви външни температури е направен теста, понеже моя D4 при около 0 градуса автоматично спира, бутона за пускане изключва, ползвам го със по старите 4 ампера батерии?

could it maybe be the temperature differnce between the batteries?
The one on the D4 was at 11° and E5 was on 3°
Maybe the output current is limited to save the cells?

think that some Parkside Tools have very different Performances: I had the old green one (first 125mm model). After it smoked up (after really hard use, was OK) I bought another Green one: a lot weaker than the older one... Same with the old green drill (1st one from 2018): still working after some abuse (for mixing mortar) and seems to be stronger then it should be. The one my friend has ist less good...

Awesome. So ill keep my d4, great performance for the price!
That Bosch insides are thick! For sure the best tool for intense constant work.
Strange on how they let the new E model roll out with such poor performance comparing to previous model ...
Regards

Very good video thanks I have the d4 is very good but I feel the vibration and the battery in my opinion should be on the opposite side because it is not handy