Комментарии:
Great video. Can you tell me how to transfer files from computer to pursa printer
ОтветитьGreat video. How do you import from your computer. I have an airplane code from eclipson and don’t know how to load it on my pursa printer. Thanks I know it’s a lot.
Ответить$800 and you have to build it and $1100 for preassembled. This has to be a joke right?
ОтветитьI was really hoping Prusa would upgrade it, to still be using 8 bit board, mono screen. It's hard when a Voron is very close in price but very well made and you will feel like you got your money's worth
ОтветитьAfter a long research I think I’m going to buy this model. My only concern is the screen. There are $300 3d printer with full color and touch panel
ОтветитьThe Prusa is a great printer. The Z axis initial calibration is stupid. I had to just print one layer, peel it up and measure it with micrometer and then readjust the Z axis offset myself. How else would you ever get the correct first layer height? If you buy a 3D printer you must also spend $15 and get a digital micrometer so you can measure things.
ОтветитьThe Sovol SV06 is a great choice and from the reviews I have watched its pretty on par with the Prusa i3 since it's based on the same exact model. The cost is perfect too $239 right now but will go up to $299 shortly. I'm really close to pulling the trigger but after all the upgrades I did to my RepRapGuru i3 I've done it's giving me great prints. Maybe time for a printer farm?
ОтветитьDo you genuinely believe it's worth $800 for a printer I have to build that's made mostly of 3d printed parts? I've had every ender 3 model and each had warped beds on top of other unique issues. I'm so fed up. I'm returning my $500 ender 3 s1 pro due to... you guessed it... a warped bed. But I don't have the funds to just drop $800 on a printer without knowing it's 100% worth it
ОтветитьJust got mine, it's a pain to calibrate the z axis! I'm in -0.800 and I feel it's too low but according to the results, it's still too high. Also, is there a way to plug a USB A into it? I only see the SD Card option. Thanks!
ОтветитьFor pla you really wanna use the smooth sheet. The textured sheet is mostly for petg and other materials.
ОтветитьWhat kind of desk mat is that?
ОтветитьDaniel, if I'd spend 800 quid on a printer kit, then spend 10+ hours assembling it, and the thing fails its very first print, I wouldn't be the happiest man in the world.
ОтветитьI enjoyed the build videos and thanx for explaining the price difference in the kit form and assembled form. This printer has been on my Wishlist for a while, unfortunately shipping it to my country is a problem right now. 😎
ОтветитьSir you clearly have no attention to detail
ОтветитьAn ender 3 can put out great prints if you build the machine straight and know what you are doing.
Ответитьwhy does everyone print in .2 and .3, it looks so bad. I print in .12mm layer height. It looks so much better.
ОтветитьDid you notice that the screen is one that can be bought from Amazon for around $13 and the knob that works the screen is on a Rotary Encoder you can get for $8.89 for 5, and that the mother board is 8 bit and you can get that for under $50. The kit is $949.00 on Amazon where you can get an Anycubic Kobra for $319.99 which prints just as good and takes 12 to 15 minutes to get going.
ОтветитьOne point for the Prusa that was missed here is the fantastic warranty and service you get, which is VERY much part of that price tag.
ОтветитьWow prusa same price as a bambu lab x1. Thats exprnsive 😂
ОтветитьI rather build a Voron 0.1 and still have some money left over. F**K prusa
ОтветитьDid your Anet printers Evolve into this Prusa 😳
ОтветитьForget that old thing. Get back to the bambu brother! I had you back from the days of anet A8!
Ответить💕👍
Ответитьno wonder why bambu is making such a huge impact on the 3d printing community. This seven year old machine needs so much tuning, even for a "plug and play" machine.
ОтветитьHallo geilles Video ich denke der neue sovol fūr 299€ macht das selbe wie der 800€ prusa ,ich finde ihn viel zu teuer und zu alt es wäre an der Zeit ein Neures Modell rausbringen und ganz ehrlich fùr 800 € hätte ich mir den BambuuLab gehollt der Josef ist mit seinen Prusas Millirdär geworden und es scheint er hat kein bock .Mir ist der zu teuer definitif aber jeden so wie er mag wenn du ihn gut findest wünsche ich dir sehr viell Spass damit hoffe du hast fun
Ответитьwell, I still feel like the mk3s is outdated (and overpriced) for '22, especially when you compare the prebuilt version with the Bambu Lab X1 for example. Take into account the MMU units and compare the setup with the X1 again, the winner is clear. Dont really get why so many people are going nuts for Prusa, if you look into everything is just a basic, middle of the road printer, nothing to write home about but well, enjoy!
Ответитьnice video! please post some comparison prints with your AM8
ОтветитьThank you for all of your awesome videos. Stay Safe!
ОтветитьWelcome to the club!
ОтветитьA long journey it’s been. I remember your first vids about the Anet A8.
Ответить