Dell PowerEdge R630 Server | NVMe SSDs Overview | Install Tips | How to Configure | M.2 | U.2 | PCIe

Dell PowerEdge R630 Server | NVMe SSDs Overview | Install Tips | How to Configure | M.2 | U.2 | PCIe

Cloud Ninjas

1 год назад

22,122 Просмотров

Ссылки и html тэги не поддерживаются


Комментарии:

@sergei9101
@sergei9101 - 19.04.2024 04:13

Thank you for the great video. Do you know "Supermicro PCIe to M.2 adapter" approach will work with Ubuntu / KVM? Also ... Do we have to use supermicro card or some similar adapter from amazon will be okay (like EYI Quad NVMe PCIe 4.0 Expansion Card , Dual M.2 PCIE Adapter for SATA , etc. )?

Ответить
@PalachSVK
@PalachSVK - 04.12.2023 19:17

I have a question is it possible to install OS like ProxMox on the Supermicro + M.2 solution and use it as boot drive ?

Ответить
@dank_stogie_yooooo
@dank_stogie_yooooo - 30.08.2023 15:37

Is the setup the same when using a R640 with those NVMe cables?

Ответить
@looper6120
@looper6120 - 25.08.2023 04:48

Hi I’m curious if you use the super micro nvme expander, I guess it recognize the two drives, but can u boot ur system from those two drives? Like esxi or truenas scale? Any follow up? Thanks

Ответить
@wilsonsony
@wilsonsony - 17.08.2023 15:28

Thank you out of the 3 which one has the fastest read write speed?

Ответить
@kevinexit12
@kevinexit12 - 06.07.2023 12:26

Those gloves you are wearing, where can I buy them? what are they called?

Ответить
@abidsaleem6149
@abidsaleem6149 - 26.06.2023 14:00

Which NVMe form factor (M.2, U.2 or PCIe gen xx ?) should I use to create a Ceph HA cluster for creating VM/CT on Proxmox hypervisor.
Proxmox node cluster is running on local 2x SAS SSDs connected to RAID/perc?

Ответить
@shaipatel4724
@shaipatel4724 - 22.06.2023 05:53

I have R640 with NVMe cables from backplane to motherboard. In this video you have a card in riser to Backplane. Do you hvae this card for R460? and can I configure RAID 1 on 2 NVMe drives???

Ответить
@mahmoudmanaa630
@mahmoudmanaa630 - 19.06.2023 02:49

This video is a reference for M.2 Dell 13 gen installation

Ответить
@johnwuethrich4196
@johnwuethrich4196 - 29.04.2023 07:45

You have to have vmware to see m.2 on the power edge? Or do you mean the os cant boot from them but a hypervisor can use them?

Ответить
@Morpheus0x2a
@Morpheus0x2a - 28.04.2023 11:29

Are you sure that only a PCIe NVMe SSD with Dell Firmware will work? I don't see any reason why, since in the OS it should just show up as an additional PCIe device, no?

Ответить
@StephenPreston
@StephenPreston - 24.01.2023 21:46

I used the M.2 on Hyper-V using storage spaces, proxmox, Truenas, Linux, in general, using ZFS... for storing VMs. As for booting, I have to use the SD add-in card to run clover boot and boot from NVME but as far as general storage you can use any SDS solution

Ответить
@carlosgoncalves5447
@carlosgoncalves5447 - 19.01.2023 23:43

Good day, what adapter will work in DELL R540?

Ответить
@nikeStars
@nikeStars - 03.12.2022 08:29

does it able to boot from nvme on pcie?

Ответить
@nikeStars
@nikeStars - 03.12.2022 08:29

have you guys try using asus hyper x m2 on the pcie riser? does it fit?

Ответить
@DIYGEEKTEXAS
@DIYGEEKTEXAS - 24.11.2022 00:16

There are rumors the u.2 nvme via expander is much slower only reading about 1GB/sec. Have you guys experienced this?

Ответить
@DIYGEEKTEXAS
@DIYGEEKTEXAS - 23.11.2022 05:41

For the U.2 using dell pcie expander kit does the nvme ssd must be Dell? With Dell firmware?

Ответить
@yedeng.827
@yedeng.827 - 30.10.2022 20:31

can you install os such as Proxmox on PCIe slot? I have a 8 bay R630, I can configure RAID and install my OS on those front panel SATA/SAS SSDs, but I want install OS and boot from a M.2 PCIe.

Ответить
@RickSwords
@RickSwords - 13.10.2022 09:37

Have a link to the super micro m.2 card?

Ответить
@leonardotoschi585
@leonardotoschi585 - 15.09.2022 14:18

What?

Ответить