Комментарии:
Sounds like he spun a bearing or something 🤔
ОтветитьQue es lukas y para que sirve
Ответитьاللهم صل وسلم وبارك على عبدك ورسولك ونبيك محمدﷺ
ОтветитьIs 20%the whole bottle
Ответитьis this a parody channel.........???
ОтветитьIt looks like the green ghost on ghostbusters!!! DON’T TOUCH OR IT MAY KILL YOU! You know who to call GHOSTBUSTERS!!!! Lol
ОтветитьThis stuff works fantastic. I've used all 3 stabilizers, the regular stuff, the high mileage stuff, and now the full synthetic stuff. One bottle per oil change has completely stopped my cold start VVTI camshaft timing gear rattle on my 3.5 Toyota engine. In general, the car seems much happier ever since I started using this stuff a couple years back. I now use it on my other Toyota with the 3.3, much quieter as well. Sorta surprising cause that motor has always been quiet as it is.
ОтветитьOne thing i experienced with Lucas products is, you have to give it time, run the car for a while before see the different, " in General, time will fix things " !!
ОтветитьThis guy says he has a shop don't take you car to him if he's showing you like this
ОтветитьYou need 60% Lucas to fix that issue
ОтветитьI’ve been using 60% in my F-250 that has 335k original motor. Been doing it for 5 years about and no problem. Low pressure prompted me to use it at 60%. That pressure needle stands erect now
ОтветитьSounds worse but I think it’s because it’s thicker
ОтветитьIs this ok to use this on a 2004 Jeep Grand Cherokee???
ОтветитьSo do you replace 1 qt at oil change? Say my car uses 4.2, would I use 3qts of oil, and 1 qt of oil ? Or do you add 1 qt to your regular oil change?
ОтветитьSame
ОтветитьThe tick of the lifters is still there
ОтветитьSTP would do the same.
ОтветитьLol! You need to drive it for some miles before your going to tell any difference, and possibly add another one.
ОтветитьJajaja 👎👎👎👎
Ответитьone thing also with oil pressure if it drops after say the engine is warm then it usually means that the bearings are going ( pushrod main ) I had an old truck that fire it up pressure was around 100 after it warmed up it would drop down to 25-30 was the main bearings but I just drove it and bought another engine
ОтветитьSo if you're oil capacity is 5 quarts, you use 1 quart of this, and 4 quarts of your normal oil?
ОтветитьDoes this help with leaking oil?
ОтветитьI truly believe that stuff doesn't work.
ОтветитьMarvel Mistry oil is the best all the old timers swear by it and it's been around way longer than Lucas for a reason and u can add it to your oil and gas and everything above and beyond
ОтветитьYou should wait until the engine is hot… or put it in while it’s running. Second your are not gonna instantly notice a difference, it’s not a magic 8 ball. You need to give it 10 minutes or so or drive it about 10 miles or so. It’s not a cure all, it’s just masks your issue or makes it so it’s not as noisy.. again your problem will still be there. Not a cure just a treatment.. good day!
ОтветитьSounds exactly the same Lucas products your just wasting your money
ОтветитьIt's louder
ОтветитьIt got louder
ОтветитьIt didn't help mine, but I was told it was a spun bearing.
ОтветитьSo for a 10 quart engine you use 8 quarts of oil and 2 quarts of Lucas?
ОтветитьDoes heat help your oil pressure
ОтветитьNATE. Please. Do research. On. Additive called. MOGLIDE by gonmf..... I've been using this product now for about 10,000 miles on two different cars with an excellent results
The same product they use in the coolant and in the fuel....
It might be a lifter
ОтветитьMy engine is knocking needs an oil change, my buddy told me that there might be a chance it might not start after an oil change, and suggested Lucas. Let me know what you'll think
ОтветитьI don't think it did.
ОтветитьTip add it when the engine is running and let the bottle sit in the sun
Ответитьthe engine is NOT quieter. still sounds like tins cans rattling in that engine
ОтветитьI have a question. Use the whole bottle or just a half.
ОтветитьI used it on a tattling motorcycle and then sold it a week later 🤣
Ответитьyou'all should lose that new jersey accent, helt helt helt
ОтветитьWould this work for a 2.4 liter Hyundai sonata gls gdi engine . It's a direct injection so I don't wanna put Lucas to quiet down the piston slap
ОтветитьShould have dumped the whole bottle in. Sounds like it needs a valve ajustment bad
ОтветитьThat's bad advice. It's knocking for a reason, you're just taking care of the knock and not fixing the problem.
ОтветитьWhoa an E15, don’t see many of them alive still
ОтветитьGive it time
Ответитьsays for badly worn engine : up to 60-80%: meaning 4 qts of 5qt capacity **
ОтветитьWhat kind of car && where do you have the oil Bosch oil reader plugged in... If you can respond to my message that would be awesome thank you
ОтветитьYou need to take it for a drive 30 minutes or so and then decide if it's still noisy.... I don't think you ran it long enough to mix well
ОтветитьThank me later, 100 miles before you decide to change your oil. Put in a quart of ATF, yes trans fluid, into your crank case (where the oil goes...) then after you've driven a hundred miles or so. Change your oil like normal. Its going to be NASTY as hell when it comes out. Then, mix in the LUCAS with the new oil, and THEN put the mixture into your engine. You are welcome.
Ответить