Converting the interior lights on my 1st Gen Tundra to LEDs

Great video. I was planning to upgrade mine. I’m not sure if your tundra comes with it, but you didn’t mention the bulb that lights up the driver’s floor. It’s located about 4 inches southeast of the fuse box. It’s attached to a silver bracket with the bulb pointed to the front of the car.
Mine is a 04 crew cab SR5

I broke the cover to the Glove box light too. I think the wiring is messed up on mine because even a new bulb didn't work

Thanks for your help ! Much appreciated !

I followed this video and am so happy with the results. Just wanted to say Thank You for sharing.

Is there a bulb in the drivers side window control panel that can be changed

for the 2005-2006 double cab, the map lights use two t10s and the dome lights use two t10s and a 36mm festoon. No 31mm festoon for these as far as I can tell

thx

Can I get a list of led bulbs for 02 Toyota Tundra

If you change from factory to led, then you have to replace ALL bulbs and they all work perfectly fine.

Awesome truck

He couldn’t say in beginning that 05-06 clusters are different. What a douchebag 🤦🏼‍♂️.

Great video showing most of the lights. I wanted to add that the 31mm was too large so I used a 29mm festoon instead in my 2003 SR5 AC Tundra

Dude, I've got an 01 Sequoia and super stoked to put these in. Appreciate the video!

Thanks for the great video! The only snag I had was I used an OEM bulb for the drive light and it’s dim. I swapped it with the L light and it was still dim. I attempted to clean the inside with a q-tip and lens cleaner but still dim. But at least it works and the rest of the cluster is bright thanks to the LEDs. Thanks again for the video and product links.

Does your truck not have the foot well lighting?

I don't see the links for the led bulbs.

Well done! Thanks!

Problem: My map and dome light work fine with the doors closed while manually turning them on but they are dim when activated with open doors. Any thoughts?

I’ll just replace the 5 lol

Keep up the good work!

If you had a hard time taking out old bulb due to space, scotch tape will be your best friend

would this work on a 2004?

Anyone have the OEM part numbers for the PRNDL bulbs?

Any advice a 2003 toyata tundra with 155k for 9,500? Should i buy it ?

On my first gen (2002) my voltage is crazy high on the cluster??? like it is a few degrees from the top bar high. Anything I might want to check like a short somewhere?

Bro, thanks for these videos. I have a 2004 Tundra that I want to refresh and your content is definitely helpful.

Can I do this on the Sequoia?

Good 👍🏼 job and thanks for leaving all the sizes for bulbs!

Thank you 🙏

Just ordered all of these bulbs. Thanks for doing the leg work and making it easier for us!!

Well... one more thing for the list... This looks easier than I thought.

On a 2005 Toyota tundra is it possible to change just the map lights and dome light?

Which head unit are you using? I put the Atoto AP6F (I think?) in mine and it doesn't sit as flush as yours

Very complete , thorough review of what’s needed… super

Great video. Thanks for helping me bring fresh lights to my 03 Tundra!

im thinking about doing green or blue led on the guage cluster and hvac🤔 is the missing bulb on your cluster for seatbelt? thinking about removing mine lol

I swapped my dash console with LED. I didn't have any problems with the drive indicator bulbs fortunately, so it may come down to what brand you got? The only one I left as a stock incandescent is the low fuel indicator because that one dims based on the voltage from the sending unit. The LEDs I got don't dim at all so you'd have a situation where you have no low fuel indication until all of a sudden you do and it's too late. :) Maybe if you found a decent LED that can handle lower voltage, you might have luck but now that I had a supply of incandescents from the others I replaced, I decided to leave it as is. Overall, my only issues with LED is that they're so bright compared to the ones on my stock head unit, I ended up trying to find a balance of having those dimmed down enough but still bright enough for the stereo, but it's possible. And I think I read about some folks who replaced the bulbs in the stock stereo itself (JBL) with LEDs but I haven't worked up the courage to attempt that.

NICE AND TO-THE-POINT!

Siri, what is the model of your Tundra radio I’m looking for a new radio to upgrade the old one and also have Apple CarPlay can you let me know thank

awesome video!

there is a "footwell" bulb on the driver side below/behind the dash - seems to shine down on the gas/break when door is opened (I think this is what triggers it, but mine doesn't work apparently). did you notice this one? i can't seem to get mine out.

My drive light just came back on. lol

Pro tip—No one should mess with changing the lower light bulbs—like the check engine lights, or the gas light etc. if you put LED’s in those slots, they will always stay on, whether you’re low on gas or not. So just stick with the OEM bulbs for that bottom row of the gauge cluster.

What size are the license plate lights? And are the dash lights dimmable with the dim switch in the truck?

Great video. Best I have seen on this replacement. Thanks😊

Terrific video! Thanks a lot! Just finished changing mine out. Took about an hour, took my time with it so as to not break anything. Had my IPad in my truck with me. Makes a BIG difference.

Hi Sal, This is a question for you. When I fill my 02 Tundra up, I notice it takes about twenty seconds for the fuel gauge to slowly rise to full. Is this normal? Do you experience this when filling up? Thanks.

Literally the day I watched this one, my drive (D) bulb burned out and I was able to swap it. Your channel has me in a choke hold.

Hi bro!! Great video...👍🏼👍🏼 I have same cars tundra 03 and s13 89 coupe😅😅

On both tundras I've had, on the map lights I remove the metal piece from the passenger but leave it on the driver side.