PERFECT Diagnostic Tool For Any Mechanic (Game-Changer!)

PERFECT Diagnostic Tool For Any Mechanic (Game-Changer!)

Steve's Small Engine Saloon

3 месяца назад

32,357 Просмотров

Ссылки и html тэги не поддерживаются


Комментарии:

@candicebeebe6688
@candicebeebe6688 - 07.09.2024 11:43

Do you take BEER as payment ??

Ответить
@richardangelini7296
@richardangelini7296 - 03.09.2024 20:44

I bought two. I misplaced one in my 1/2 acre tool box. I did find it, about a month later.

Ответить
@markinator8826
@markinator8826 - 01.09.2024 19:04

Good tip, Thanx Steve!!

Ответить
@jasonbrindamour903
@jasonbrindamour903 - 31.08.2024 20:47

I modified a pair of industrial ear muffs with a grommet that holds a plug or 1/4" tubing lead to find air leaks at my job.

Ответить
@thomasfrost6993
@thomasfrost6993 - 31.08.2024 16:43

I remember playing with my fathers mechanics stethoscope when I was a kid back in the 70's. One thing you might want to point out is to not drop it or drag the tip across anything. MAN does that blow your ears out. If you drop it and that tip hits the floor like a spear, JEEZUM CROW does that hurt your ears. POW!!

Ответить
@plupyduplupydu1369
@plupyduplupydu1369 - 31.08.2024 13:00

Prostrate time.

Ответить
@woodrowwilliams1812
@woodrowwilliams1812 - 31.08.2024 02:55

My uncle used a broom stick.

Ответить
@DugatDizzyLizzys
@DugatDizzyLizzys - 29.08.2024 18:57

Hi Steve.
Diagnostic tools that save you time, pay for themselves.
I knew of them years ago, and now I need to get one after your demonstration that shows how useful it'll be 👍

Ответить
@randyc5650
@randyc5650 - 27.08.2024 17:40

Steve, I used to use a cutoff broom stick. I could hear grinding and knocking but not a heart beat. You had to make sure you didn't hit the fan or a fan belt and drive it through your brain.

Ответить
@Hearthman1159
@Hearthman1159 - 25.08.2024 01:09

As a retired paramedic, rotate the ear tips forward at about a 15 degree angle and they'll fit your ears better. Lisle makes one with a funnel and tube accessory useful for air induced sound auscultation.

You can use this stethoscope to hear if a gas control valve is opening or closing on a furnace. I think the intention was to use the metal rod against an engine to hear internal grinding and growling not audible to the naked ear. All sorts of uses.

Ответить
@timtweet8149
@timtweet8149 - 24.08.2024 18:58

Looking for a good cover for my snapper 28" rear engine rider?

Ответить
@waltbennett5503
@waltbennett5503 - 22.08.2024 23:49

Those are far better than the old moto mechanic's screwdriver blade against something and handle to the ear.

Ответить
@Leonardokite
@Leonardokite - 21.08.2024 23:42

Somehow I miss this video when it came out. I haven't seen one of those things in years and years. I can see how it would definitely be useful. I think I might just have to go for that! Thank you my friend 👍

Ответить
@JohnM-zu2bi
@JohnM-zu2bi - 21.08.2024 21:28

7.99 at Harbor Freight

Ответить
@Bushman9
@Bushman9 - 20.08.2024 07:28

Just got one on Amazon, all in (tax and shipping)(I’m in Ontario) for $12!
It was on sale… regular price was $17.

Thanks for the heads up Steve.

Ответить
@rickreed2785
@rickreed2785 - 19.08.2024 19:07

Have one I made myself from a throw away stethoscope a nurse I know had. It is $13 on Amazon here in the states. It is a amazing tool.

Ответить
@davidbrewer7937
@davidbrewer7937 - 19.08.2024 10:36

My father used to put the tip of a long screwdriver on various spots of a running engine or machine & the other end against his ear to do exactly this...

Ответить
@boatman222345
@boatman222345 - 19.08.2024 06:22

A very useful tool. When I was a kid I used to hold a 1/4" dowel against the housing of whatever bearing I was checking out and put the other end against my ear...sure enough you could hear a bad bearing through the stick. Years later my doctor gave me a stethoscope he was going to replace and I've been using that ever since. Like the idea of the metal rod addition as it would let me reach items I can't reach with a regular stethoscope.

Ответить
@capnpugwash5403
@capnpugwash5403 - 19.08.2024 03:31

For modern cars where everything is so jammed up that might be a good idea, but over the past 60 years somehow I always managed with a long screwdriver with the pointy end on the object and the handle pressed against my ear. It would certainly work on a weedeater. For balancing multiple carbs a length of steel pipe was extremely accurate, even though I also had a proper air flow meter. Sometimes simple is good.

Ответить
@fredroberts6772
@fredroberts6772 - 19.08.2024 03:08

thats so old school! dad had one!peice of wood works too!

Ответить
@danielmchugh9052
@danielmchugh9052 - 19.08.2024 02:44

I have had one in my tool box for 30 years...... very handy when needed!

Ответить
@TheLawnmowerLady
@TheLawnmowerLady - 19.08.2024 00:24

Awesome tool. I bought one about 15 years ago from HF to find a bad bearing on my scooter without taking it apart. I don't think I spent more than $10. I never thought of using it to find stuff inside of walls. Brilliant.

Ответить
@rolandlewis2356
@rolandlewis2356 - 19.08.2024 00:06

Hi Steve, I have a friend that's mechanically inclined. His car broke down on the highway and wouldn't run. He had the car towed to his Dad's house (because it was close by). My friend told his dad that the car's engine quit working on his drive to work and didn't know why. The father said : Get me a 2x4. He took the stick and put it on the engine block. Told his son to turn the key while he had his ear close to the stick. The son turned the key and his dad told him to stop. He said that the distributor was broken. The son took out the distributor and the shaft was broken. Now mechanics have a tool to listen with, even better.
Take care. Roland

Ответить
@paulmorrey4298
@paulmorrey4298 - 18.08.2024 22:02

Thanks Steve

Ответить
@dogsbyfire
@dogsbyfire - 18.08.2024 17:35

Nice video!

Ответить
@LongRidgeFarmer
@LongRidgeFarmer - 18.08.2024 16:47

He probably still does that.

Ответить
@keithfarley7093
@keithfarley7093 - 18.08.2024 16:23

You can check fuel injectors on a car or truck with it , you can actually hear them click open to determine if one might be clogged

Ответить
@woodstream6137
@woodstream6137 - 18.08.2024 09:00

I wonder if it could find a carpenter ant colony, bees

Ответить
@sillywillie
@sillywillie - 18.08.2024 08:45

Whaaat? LMAO 😂

Ответить
@Willy7212
@Willy7212 - 18.08.2024 08:16

Great tool that I bought years ago at Princess auto.
Works well for diagnosing bad idler wheels and belt tensioners, bearings ect. on vehicles.
Never thought to use it on small engines.
Great idea.
Thank you Steve.

Ответить
@garrettvillwok3693
@garrettvillwok3693 - 18.08.2024 06:21

Steve, need your help. I just got a stihl ms291 saw. The fuel tank vent is plugged how do I get to it?

Ответить
@bertram_oredrock
@bertram_oredrock - 18.08.2024 05:48

I was a ASE Master technician for about 25 years. My stethoscope was one of my useful diagnostic tools. It will help discover internal problems before they break and cost hundreds to thousands of dollars. Great video, great advice.

Ответить
@Ron-0417
@Ron-0417 - 18.08.2024 04:36

$8 at Harbor Freight

Ответить
@ihus9950
@ihus9950 - 18.08.2024 03:13

Great tool that's for sure 👍🏻

Ответить
@jeremyankney1733
@jeremyankney1733 - 18.08.2024 03:11

I agree. I've had mine for over 30 years.

Ответить
@amoncopeland6747
@amoncopeland6747 - 18.08.2024 01:57

welp... as an electrician. .. I use a 3ft piece of #4 bare... put it to your earlobe and put it on anything.. You will hear soo well that you can actually see the mechanization in your head

Ответить
@Dan-Jack_does
@Dan-Jack_does - 17.08.2024 23:27

Great vid! Already have a stethoscope (and agree with you), used on engines, but not walls... yet!! 😄😄

Ответить
@paullatour7012
@paullatour7012 - 17.08.2024 23:06

“WHAT?” Haha. I ordered these for my co-workers then showed them how to track down noises in pumps and motors.

Ответить
@kevola5739
@kevola5739 - 17.08.2024 23:00

You should try listening to yourself drinking a beer. Can you tell which brand it is?

Ответить
@DtKnize
@DtKnize - 17.08.2024 22:37

Works great for finding bad pulley bearings.

Ответить
@liljoeii6091
@liljoeii6091 - 17.08.2024 21:23

Yeah my dad was a mechanic too yeah he would listen to inside the motor with one of those things awesome video thank you

Ответить
@KentonTyrie-p3v
@KentonTyrie-p3v - 17.08.2024 21:03

"What?!"

Ответить
@65csx83
@65csx83 - 17.08.2024 20:54

My first job, when I was 16, I remember the head mechanic answering my coworker's question about a buy he was contemplating: 'If you think you need that tool to do that job, you shouldn't be doing that job'.

Ответить
@WimpyGimpy
@WimpyGimpy - 17.08.2024 20:52

Used to work in a service center and I bought one of those 40 years ago. They are great for finding clicks and ticks in moving assemblies.

Ответить
@scottmacleod6301
@scottmacleod6301 - 17.08.2024 20:27

The first time I ever saw and got to try one was on a Buick fireball 8 that had a loose rod according to the mechanic it was #5 or 6 and it definitely sounded different from the others. I thought it was kinda cool.

Ответить
@teridacktaljones4553
@teridacktaljones4553 - 17.08.2024 19:43

🦝

Ответить
@edgatternig9729
@edgatternig9729 - 17.08.2024 19:37

I have one!!! Every sound is one hundred times louder. I don’t usually use it until I need to know something. I usually forget I have it.
Water running through a pipe, haven’t tried that yet!
Cheers Steve 🍻
Ed out

Ответить
@treytaylor7553
@treytaylor7553 - 17.08.2024 19:15

Awesome tool to have. Great video!

Ответить
@renelescault1282
@renelescault1282 - 17.08.2024 18:52

WHAT !?!?
🤪😉

Ответить