Grill Lights - Ram Rebel

Will 18 gauge wire work for this setup? I have some left over from making bluetooth radios.

Do you think a 4-pin 40/30 amp relay work as well? Already have a few of those around. Thanks!

Excellent video! I'm making of list of mods for mine and will definitely be adding this one!

Did you have to remove the headlight to access this maker wire to the relay seems impossible to do without removing the headlamp

Great and awesome video just need insight on the marker wire tap access

How are they holding up as far as not coming out now that they have been in for awhile

dang i would love to do this to my laramie, do you think theres a light that would fit that good into a 2021 laramie grill?

Awesome video. Installed per your instructions etc. but not getting relay to trigger using passenger light wire white with orange. I have 2021 Ram Rebel.

Tried wiring posi tap multiple times. When I connect trigger wire to 12v source I hear it click and LED lights work just like yours.

Any ideas?

I could by pass relay and use a fuse tap.

Do you know what color wire is for daytime running lights only? 2018 ram rebel.

Please tell me how you got it to run without the headlights on.. I even used my tazer dt to turn them off and couldn't. Great vid... did something really similar myself.

Its not that serious bud. Way easier ways to do this

So I tap into the marker circuit lamp (white w/organge stripe) on my driver side, since it was much easier to reach; however I get nothing. Any advice? I bought the red taps you suggested.

Did you use 4 or 5 relay? I know on post your mentioned terminal 30, 85, 86 and 87. Do you have recommendation on which relay is better?

What hood protector do you have on this truck? I have a black 2019 rebel amd like the avs one that looks like that but has lights in it as well. Thanks in advance

Would it be possible to posi tap into the same wire as the daytime running lights of the truck making it so the lights are always on (day and night)? If so, which wire would you tap into?

For anyone not getting enough voltage from your marker lights to power the relay, try tying #30 into your trailer marker lights in the fuse box (Mine was fuse F12).

Awesome video. Thank you.

Can you reccomend the smoke but white lights and are they dot making then perfectly legal. I figure you may know where I xan get 4 lights like yours but white. Ty sir

Could you have hooked this to your trigger and used the switch to turn them on amd off or is that a no go. I wanna hood up the trigger 6 or 4 with wireless switch

Great instructions. I am now a fan. Thanks for the lesson.

Thanks a major bunch for the video and instruction! I ordered a different set and like these way better due to install! So it's been a while since the last time someone asked the question, Have they popped out yet for any reason? That's the only thing I'm worried about with just being pushed in? Thanks again. defiantly a fan!!

Were can i buy these for a 2022 Rebel. Im in Canada

So curious question I have a 2022 ram rebel the running lights do not come on when the truck is running only the small white strip above the light. I’ve looked and tested I can’t find that wire anywhere the wiring harness is a very tight and wrapped. Would it be OK do you think to use a fuse tap and go to the relay the same as you would the marker light wire in order to run The front three lights

Where do you buy your 12v relays?

Why did you get a Ram if you want it to look like a Ford Raptor???
A Ford wannabe.

great video. I'm using the positap on the white orange and have ensured my drl is turned on, but the signal isn't triggering my relay. I bypassed the tap and made sure the relay is working. I have a 2021 rebel. Did you have any trouble getting the white orange cable to trigger the relay?

Do you have a link of which ones to buy?

@Water Fowler 41 Is the White/Orange wire available on the both right and left headlamp harnest? I have 2022 model. And second question, how about connecting the relay 86 wire to an accesory fuse? Thank you.

Is it the same wire(white/ orange stripe) on the limited headlight ?

I did this exactly and it works great. Now I need another wire to tap into as my lights do not turn on when my headlights are on at night. I want the lights to be on all the time when truck is running. Any ideas/thoughts. Thank you in advance.

Did you do anything to secure the new smoky lights on the back end inside? I expected them to come with some sort of washer/screw to keep it in place.

Well done!

Question: I cannot find your video on how you set up the relay to the side blinker. Can you post the link?

Excellent work

Fantastic video and explanation. Only thing I missed was how you kept them secure. The first light you installed was flopping out and suddenly you went to all four installed and securely in place.

0.035 per light is what the link you posted said about them if thats true a 5 should do it or 10 overkill like you said but better to be safe then sorry lol

hello,do you have a video with connection relay with your drl ?

Waterfowler, you were right. I have a 2020 Rebel. On the drivers side as well as passenger side have white with orange stripe wire. The source is running lights and it showed 14.1 bolts when truck is running. Will tap into that. Someone said low voltage well it’s not. Mine are led also. Exposed drivers side, black, white and white with orange stripe. Thank you again, for your knowledge!

Tapping into White and Orange cable on the passenger side is not activating the relay… 😢

So if you fish the wires between that foam spot right there, does it interfere with the active grille shutter? I’m about to undertake this and I don’t wanna throw a code for the grille shutters.

I was thinking of installing an AVS Aeroskin Lightshield Bug Deflector. It comes with the same lights and make my front hood look beefier :)

Awesome vid, I only suggest to use water resistant butt connectors and the ground on a better spot other than the top for a cleaner look, perfect explanation and great idea using the relay.👍

Probably a dumb question,
but can you show how you tapped into the battery for the relay.

The amount of amperage draw from the marker lights to trigger the relay is the same if not less to actually run the small led grill lights. Using the fuse jumper with a separate 5amp fuse is just fine. Lot of extra work for nothing.

What kind of exhaust/muffler is on the truck? Does not sound stock. Sounds good though!

Perhaps you would be interested in us modifying the glowing RAM

Man....I needed the relay schooling for my 23' Rebel G/T. You explained it with pictures. So many thanks for making it stupid easy. Notional beers on me

Sorry if I missed it but what 12V relay are you utilizing?

Looks great brother! Add some cab lights on that beast as well.

Hi, just a question. Got my 23 rebel and bought the same lights that you have. Im wondering if i can use a fuse tap as a signal to my relay to turn on the lights instead of tapping into the lights.
Would that work? Thanks!!